Love ELP! Cannot stop them...
YUANQING BLUENOSE - Peter Voogt [COMPLETED BUILD]
- Thread starter Peter Voogt
- Start date
- Watchers 68
NOSTALGIC Always loved that sound track.
I can hear the complaints already…You charge how much for a sail? C’mon - it’s just a tissue!
From The Beginning… my fav by ELP.
Or…what is this? I wouldn’t wipe my bum with this!
- Joined
- Sep 3, 2021
- Messages
- 4,349
- Points
- 688
Honestly, Dean? TMI!Or…what is this? I wouldn’t wipe my bum with this!
What you are afraid for the tiny hooks?Or…what is this? I wouldn’t wipe my bum with this!
- Joined
- Sep 3, 2021
- Messages
- 4,349
- Points
- 688
This is going from bad to worse...What you are afraid for the tiny hooks?
I'll pass, thank you very much, goodnight everybody!
Just poking fun at the tissue paper.
But we all know it looks excellent!
Or…what is this? I wouldn’t wipe my bum with this!
Honestly, Dean? TMI!
What you are afraid for the tiny hooks?
I didn’t I know I had initiated such a groundbreaking change …………
Regards, Peter
- Joined
- Sep 3, 2021
- Messages
- 4,349
- Points
- 688
Of that there is no doubt!
The jib is also furled on the bowsprit:
A: the sheet of the jib. The fixed end is attached with a hook to an eye. The running end through an eyelet on the deck to the front belaying pin. The two pendants are not that long and are now free on both sides. When hoisting, one will lie over the stays of the jumbo jib. Depending on which side he is healed.
B: The fixed end of the sheet of the balloon jib is hooked in one eye behind the main shrouds. The pendant run outside around the fore shrouds. The tackle of the sheet inside at the main shrouds.
C: both downhauls via a eyepin on the bow to the 2 belaying pins behind it.
It's pretty busy on the foredeck. But the professional crew knows exactly what needs to be done and what to take into account when hoisting the jib and the balloon boom.
The two sails more in detail:
The balloon jib is furled up on the starboard side. The port pendant runs aft over the jib stay. To be able to turn to port when hoisting or sailing if the wind requires it.
The overall picture on the port side with the painted hull:
A little overexposed light at the rear. Better pictures later.
The total picture on the starboard side with the open hull:
For myself, I am convinced that I did the right thing by furling the jib and balloon jib on the bowsprit.
Now to bring some nice little things, such as rope hangs, the ship's bell, dorie hooks etc etc.
Still some time to go until my BN is finished.
Regards, Peter
A: the sheet of the jib. The fixed end is attached with a hook to an eye. The running end through an eyelet on the deck to the front belaying pin. The two pendants are not that long and are now free on both sides. When hoisting, one will lie over the stays of the jumbo jib. Depending on which side he is healed.
B: The fixed end of the sheet of the balloon jib is hooked in one eye behind the main shrouds. The pendant run outside around the fore shrouds. The tackle of the sheet inside at the main shrouds.
C: both downhauls via a eyepin on the bow to the 2 belaying pins behind it.
It's pretty busy on the foredeck. But the professional crew knows exactly what needs to be done and what to take into account when hoisting the jib and the balloon boom.
The two sails more in detail:
The balloon jib is furled up on the starboard side. The port pendant runs aft over the jib stay. To be able to turn to port when hoisting or sailing if the wind requires it.
The overall picture on the port side with the painted hull:
A little overexposed light at the rear. Better pictures later.
The total picture on the starboard side with the open hull:
For myself, I am convinced that I did the right thing by furling the jib and balloon jib on the bowsprit.
Now to bring some nice little things, such as rope hangs, the ship's bell, dorie hooks etc etc.
Still some time to go until my BN is finished.
Regards, Peter
Last edited:
Thanks, Stephen. It took the 'some energy' and time to get it neatly next to each other. Then small stays are not very cooperative to keep their position.
Regards, Peter
Oh yes... there were requests for a 'size reference':
Hereby!
Regards, Peter
Hereby!
Regards, Peter
Wow you have big fingers.
Haha, that’s why I can handle big clothespins ……
Absolutely beautiful and realistic in every way!!! This is spectacular work you have done Peter!
Good morning Peter. Great banter - I don’t know how you managed to start this but made me laugh. As for your BN, it is just WOW! Certainly one of a kind and so correct in the detail and execution. Respect! Cheers GrantI didn’t I know I had initiated such a groundbreaking change …………
Regards, Peter