• Win a Free Custom Engraved Brass Coin!!!
    As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.

New kit 1:160 midship cross-section of the HMS Enterprise 1774

Dry-Dock Models & Parts said:
The tariffs for Canadian products are higher than for Chinese made products ,it is 35%
Click to expand...
You are correct, searching online, I found what you stated. A 35% Tariffs from Canada.

From China:
  • For postal items: A tariff of 54% of the item's value or a flat fee of $100 is applied per parcel. Your shipper will likely select the cheaper of the two.
  • For packages from commercial carriers: Shipments through private couriers like FedEx and UPS are subject to a 30% ad valorem tariff.
As all the kits that I got from China were shipped by FedEx or DHL, a 30% tariff will apply.

Well, it is what it is, but at least isn't a 50% :-) . Please, let us know when the kit is available at your website. And then I do my numbers.

thank you, and have a great weekend!!

Daniel
 
Dematosdg said:
You are correct, searching online, I found what you stated. A 35% Tariffs from Canada.

From China:
  • For postal items: A tariff of 54% of the item's value or a flat fee of $100 is applied per parcel. Your shipper will likely select the cheaper of the two.
  • For packages from commercial carriers: Shipments through private couriers like FedEx and UPS are subject to a 30% ad valorem tariff.
As all the kits that I got from China were shipped by FedEx or DHL, a 30% tariff will apply.

Well, it is what it is, but at least isn't a 50% :-) . Please, let us know when the kit is available at your website. And then I do my numbers.

thank you, and have a great weekend!!

Daniel
Click to expand...
It is is cheape to use Standard shipping ,regular post and delivered by USPS because Ups,Fedex and Dhl started charging very high brokerage fees
 
Last edited by a moderator:
032_系缆柱.jpg
033_系缆柱.jpg
借助夹具制作主桅前后的系缆桩↑
The main topsail sheet bitts and main jeer-bitts are made in the jig

034_系缆桩.jpg
安装主桅孔加强版和两个系缆桩↑
The mainmast partner and two bitts are fitted in place

035_安装后甲板.jpg
借助夹具定位并安装后甲板↑
The quarter deck is located according to the jig and glued firmly

036_安装后甲板竖梁肘材.jpg
安装后甲板的竖梁肘材↑
The lodging knees are glued in place

037_船舷轮廓线.jpg
借助模板画出船舷轮廓线↑
According to the guidance of a template, the profile of the ship's side is drawn on the hull

038_取出船体.jpg
裁断肋骨延长段并取出船体↑
The extension of the frames are cut off and the hull is taken out of the building bert

039_打磨船舷.jpg
040_打磨船舷.jpg
按线条将船舷打磨成形↑
The ship’s sides are shaped according to the profile line

041_安装后甲板栏杆弯头.jpg
042_安装后甲板栏杆.jpg
安装后甲板栏杆弯头和舷缘板↑
The drift rail volutes and planksheers are glued in place

042_安装船体花线和舷梯.jpg
安装甲板通道、后甲板栏杆花线和上、下护舷材↑
The gangboards, the quarterdeck dirft rail, the upper and lower sheer rails are glued in place
 
044_泵体.jpg
组装水泵筒体↑
The pump barrel is being assembled

045_水泵.jpg
安装水泵金属件↑
The metal parts are fitted to the pump barrel

046_安装水泵.jpg
将水泵装上甲板↑
Two pumps are fitted to the upper deck

047_安装后甲板栏杆.jpg
安装后甲板栏杆↑
The quarter deck breastrail has been fitted in place

049_侧支索承板.jpg
安装侧支索承板↑
The channels are glued to the ship's sides

048_安装主桅.jpg
050_吊铺网架.jpg
安装主桅和吊铺网架↑
The mainmast, the stanchions of the gangboard, the hammock cranes at the sides, the hammock crane at top of the breastrail, the gangboard ladder stanchions are fitted in place

051_火炮.jpg
组装火炮↑
The gun has been assembled

052_安装火炮.jpg
所有火炮就位↑
The guns have been in place
 
053_制作小艇.jpg
在船台上制作18英尺小艇↑
The hull of the 18-foot Cutter is being assembled in the building bert

054_制作小艇.jpg
安装小艇甲板↑
The deck is fitted to the hull

055_小艇.jpg
船载快艇完成↑
The Cutter has been completed

056_大艇.jpg
24英尺大艇↑
The 24-foot Launch

057_中艇.jpg
28英尺中艇↑
The 28-foot Pinnacle

058_安装小艇.jpg
3艘小艇就位↑
Three boats are placed on the corresponding crutches.

059_绞盘.jpg
060_绞盘.jpg
组装绞盘↑
The upper and lower capstans are assembled

061_安装绞盘.jpg
绞盘安装到位↑
The capstan has been fitted in place

62_完成.jpg
大功告成↑
Work completed
 
Yes, it's beautiful and I hope it's also affordable, because there are also customs duties on top ... :eek:

Every cent hurts when the wallet is so small. Unfortunately, I have an onion wallet. When I look in there, it brings tears to my eyes ...ROTF

Cheers

Günther Ship-1
 
Unicorn models said:
The gun has been assembled
Click to expand...
The open framing of the ship's boats is really nice to see, especially at this tiny scale. VERY impressive!

Is there a reason you used what look a lot like Commonwealth pattern guns (1650-1715) instead of Armstrong Frederick pattern guns (1760-1790) which would have been on the Enterprise 1774? At this tiny scale I am guessing few would notice, but it is just as easy to make the AF as it is to make the Commonwealth pattern. The missing chase astragal ring and button ring is what sort of jumped out.

No matter, it's great to see a fully framed model kit at such a small scale. Well done!

Thanks
Allan
 
You must log in or register to reply here.
Back
Top