Karl Danke. Ein nachrustung von die deckkurven macht dass process einfacher, ein sehr gutes idee.
-
"2025 Annual SOS Donation Drive Underway"
Please consider making a Donation to SOS to support our continuing growth and developement. It is greatly appreciated !!!
*** Read More - - Click Here ***
https://www.paypal.me/DonateSOS
74 GunShip 1/36 by Jeronimo [COMPLETED BUILD]
- Thread starter Jeronimo
- Start date
- Watchers 52
-
- Tags
- 74 gun ancre completed build
Hallo and thanks to everyone for the kind comments.
Orlop Deck,
Dividing walls and pump shaft installed.
I leave the shaft partly open to show the pumps
and the cannonball shaft with its three different calibres.
First gun deck ,
partially planked to show the substructure.
Next I will probably install the ballast stones and storage barrels.
Karl
Orlop Deck,
Dividing walls and pump shaft installed.
I leave the shaft partly open to show the pumps
and the cannonball shaft with its three different calibres.
First gun deck ,
partially planked to show the substructure.
Next I will probably install the ballast stones and storage barrels.
Karl
Great work as usual Karl.
Production of the storage barrels in the individual work steps.
Although I didn't fill the entire storage room with it.
The ballast stones should actually be a bit smaller and more rounded,
but I didn't get them anywhere. Also works like that.
Gerard Delacroix once wrote to me,
Ballast stones were roughly the size of a walnut.
Ballast stones were mixed thoroughly with grinding ground
as an adhesive and filled up between the individual barrels.
Karl
Although I didn't fill the entire storage room with it.
The ballast stones should actually be a bit smaller and more rounded,
but I didn't get them anywhere. Also works like that.
Gerard Delacroix once wrote to me,
Ballast stones were roughly the size of a walnut.
Ballast stones were mixed thoroughly with grinding ground
as an adhesive and filled up between the individual barrels.
Karl
- Joined
- Aug 2, 2019
- Messages
- 211
- Points
- 278
Hello Karl. I have enjoyed your build since you started it and all the care you are putting in to it. Every thing looks outstanding sir. Keep up the outstanding work and will be following your build. Gary
Looking very good - and great progress -> WOW - I like it very much 
Thanks to everyone for the kind comments and likes.
Ballast stones, size and color of the stones changed.
Additional storage barrels installed in the storage rooms.
Karl
Ballast stones, size and color of the stones changed.
Additional storage barrels installed in the storage rooms.
Karl
Great work, Karl!! As always, top-notch!!
The ballast is looking now much much better - great appearance
Installed partition wall of the storage room.
Karl
Karl
Last edited:
Ballaststone
Karl
Karl
Error with the ballast stone.
Karl
Karl
Last edited by a moderator:
Ok - wieder etwas dazu gelernt
Ok - so we learnt something
Many Thanks for sharing with us this correction......
Ok - so we learnt something
Many Thanks for sharing with us this correction......
Ballast stones removed from between the barrels.
Karl
l
Karl
l
Thanks to everyone for the kind comments and likes.
Before equipping the 1st gun deck, I fitted the deck beams and knees
of the 2nd gundeck and them dismantled them again.
Karl
Before equipping the 1st gun deck, I fitted the deck beams and knees
of the 2nd gundeck and them dismantled them again.
Karl
Wow, that is incredible joinery.
If you plan to plank over those beautiful beams like you did to the deck below then that would be a travesty to your skills and ship modelling in general.
Thank you, I for one appreciate every pixel you post.
If you plan to plank over those beautiful beams like you did to the deck below then that would be a travesty to your skills and ship modelling in general.
Thank you, I for one appreciate every pixel you post.
