Just -> WOW - looking great
74 GunShip 1/36 by Jeronimo [COMPLETED BUILD]
- Thread starter Jeronimo
- Start date
- Watchers 51
-
- Tags
- 74 gun ancre completed build
Simply incredible craftsmanship... Even with a shop full of tools and all of the individual skills necessary, I couldn't imagine the amount of patience and vision required to keep up with such a laborious project. Thank you so much for sharing your work!
-Gregory
-Gregory
Hello and thanks to everyone for the kind comments.
Karl
Karl
Last edited:
Hallo Karl
very good work - looking very good
Clever idea with the golden leaf (Blattgold) to get the imagination of brass tubes !!!
One question: How you cut the octagonal square of the the pumps on your circular saw? How did you get this real correct form.
Eine Frage: wie hast du die genaue achteckige Form deiner Pumpen erreicht? Mit der Kreissäge?
very good work - looking very good
Clever idea with the golden leaf (Blattgold) to get the imagination of brass tubes !!!
One question: How you cut the octagonal square of the the pumps on your circular saw? How did you get this real correct form.
Eine Frage: wie hast du die genaue achteckige Form deiner Pumpen erreicht? Mit der Kreissäge?
Hi Uwe,
dies ist kein Blattgold, sondern Schlagmetall/Messing.
Das war die Alternative für einen Messingstab von 6 mm Durchmesser,
den ich nicht hatte, und eine Fahrt nach Wiesbaden erfordert hätte ,78 km.
Es geht auch so.
Anfertigung eines Achteck-Stabes
Stärke des Vierkantstabes x0,29
Beispiel:
12,0 mm x 0,29 = 3,48
An jeder Kante des Vierkants dieses Mass anreissen.
Das wären dann die zukünftigen Kanten des Achtecks.
Kreissägeblatt auf 45 Grad einstellen und mit Anschlag auf der angezeichneten
Linie/ Abstand ( hier 3,48 - 4 x ) schneiden. Fertig.
Grüsse
Karl
by google translation:
Hi Uwe,
this is not gold leaf, but striking metal / brass.
That was the alternative for a brass rod with a diameter of 6 mm,
which I did not have and would have required a trip to Wiesbaden, 78 km.
It works like this too.
Production of an octagon stick
Thickness of the square bar x0.29
Example:
12.0 mm x 0.29 = 3.48
Mark this dimension on each edge of the square.
That would be the future edges of the octagon.
Set the circular saw blade to 45 degrees and with the stop on the marked
Cut the line / distance (here 3.48 - 4 times). Finished.
regards
Karl
dies ist kein Blattgold, sondern Schlagmetall/Messing.
Das war die Alternative für einen Messingstab von 6 mm Durchmesser,
den ich nicht hatte, und eine Fahrt nach Wiesbaden erfordert hätte ,78 km.
Es geht auch so.
Anfertigung eines Achteck-Stabes
Stärke des Vierkantstabes x0,29
Beispiel:
12,0 mm x 0,29 = 3,48
An jeder Kante des Vierkants dieses Mass anreissen.
Das wären dann die zukünftigen Kanten des Achtecks.
Kreissägeblatt auf 45 Grad einstellen und mit Anschlag auf der angezeichneten
Linie/ Abstand ( hier 3,48 - 4 x ) schneiden. Fertig.
Grüsse
Karl
by google translation:
Hi Uwe,
this is not gold leaf, but striking metal / brass.
That was the alternative for a brass rod with a diameter of 6 mm,
which I did not have and would have required a trip to Wiesbaden, 78 km.
It works like this too.
Production of an octagon stick
Thickness of the square bar x0.29
Example:
12.0 mm x 0.29 = 3.48
Mark this dimension on each edge of the square.
That would be the future edges of the octagon.
Set the circular saw blade to 45 degrees and with the stop on the marked
Cut the line / distance (here 3.48 - 4 times). Finished.
regards
Karl
Bread oven
without the interior of the oven with bricks.
Karl
without the interior of the oven with bricks.
Karl
Looking very good - so you can bake the "Semmeln" for the Sunday breakfast .... 
Hallo Karl,
after once more looking on the photos - I realized, that the chain of the oven-door is not blackened......
after once more looking on the photos - I realized, that the chain of the oven-door is not blackened......
Hi Uwe.
Bread oven.
The chain of the oven flap was blackened,
the handle, due to the many touching, remains blank.
Karl
Bread oven.
The chain of the oven flap was blackened,
the handle, due to the many touching, remains blank.
Karl
Last edited:
Manufacture and construction of the carriage
for the 36th cannon.
Karl
for the 36th cannon.
Karl
Last edited by a moderator:
Fantastisch !!!!!
"Ganz großes Kino" - Ich bin begeistert
Great work my friend
"Ganz großes Kino" - Ich bin begeistert
Great work my friend
This is absolutely high school, perfect in every respect. Einfach toll. Chapeau!!!
Hi kalliboot.
Vielen Dank für das Bild.
Karl
Vielen Dank für das Bild.
Karl
Thanks to everyone for the kind comments and likes.
Manufacture and assembly of the cannon barrel.
Karl
Manufacture and assembly of the cannon barrel.
Karl
Last edited:
Incredible craftsmanship, Karl! Many thanks for sharing your method.
Just getting caught up superb craftsmanship Karl Master Artist
Sehr gute Arbeit - Respekt