Bluenose by Liebre

[Dean62]

No reason to worry Dean

I thought I had done something wrong, but the other mast with the square is for the aft deck
Just looked at the drawing again
The round ring fits there
At the foredeck I have placed in such a way that all deck elements fit here
Everything again under control here, I was shocked

You are showing nails on the planks, at the edge of the square mast plate. The planks would normally go up to and around the mast hole. Then the mast has a base ring on top of the deck planks, which is round. If you want to leave that area unplanked to show the mast plate at the deck level, then the boards are actually cut short for viewing purposes and would not have nails. That is what confused me.

 

[Henk Liebre]

Did a few tests today for the deck construction

Not white, but cream white, this will be the final color for me

 

[Henk Liebre]

Adjusted the shutters etc, a shutter will be opened, stars are partly open


And also did some color tests with the slats I have

Shutterswill be sanded straight later on

 

[The Sailor]

Very nice job, Henk!!

My Bluenose is sick, think a little cold. I wait for her to recover and since I don't know how to sit idle (!), I'm finishing a canoe designed by our friend Gilles.

 

[RDN1954]

Adjusted the shutters etc, a shutter will be opened, stars are partly open


And also did some color tests with the slats I have

Shutterswill be sanded straight later onView attachment 294219
View attachment 294220

I like the structure of the wood you selected.

 

[Henk Liebre]

Took a different route to avoid the soot problem
And immediately did some tests to see how the coloring of the deck planks would turn out . to see your mistakes, to show the colors is another story . In reality, this looks better than the photo would lead you to believe.

 

[Henk Liebre]

Aft deck sanded again and glued strips, and replaced the connecting lath 55 to my own version because due to my adjustments the lath in the kit no longer fit

 

[Henk Liebre]

Decided to first plank the hull and then continue on the deck to finish it, the white color is still the primer

 

[Peter Voogt]

Good to see the progress you made, Henk. And the personal approuch for some items.
Regards, Peter

 

[Dean62]

Looking very good Henk! Good to see your progress!

 

[Heinrich]

You seemed to have found a nice rhythm now, Henk. Good work!

 

[Henk Liebre]

After suffering serious damage earlier this year, my BN decided to continue his journey and immediately made some adjustments, which I was previously less satisfied with.

Inside wall added

 

[Henk Liebre]

Inside decks decorated differently

 

[Henk Liebre]

Deck modified (with some own additions)

 

[Henk Liebre]

Cover with different stains mixed to get a somewhat varied color difference

As is well known, colors come out less ''Out of the paint'' through photography

I am quite satisfied with it

 

[Henk Liebre]

Started with shelves last month
With many thanks to Johan (RDN1954) where I have exchanged many PM messages lately for all the advice and help

 

[Henk Liebre]

And completed this week

 

[Henk Liebre]

Now treated with 2 layers of Danish Oil

 

[Peter Voogt]

Nice to see you started up with the build of your BN, Henk. With a nice progress and good looking planks inside and outside!
And after Lawrence @Canoe21, John @jeep and yours, we have some more active BN buil-logs.
Regards, Peter

 

[RDN1954]

Heartfelt congratulations on reaching this milestone!
From our frequent conversations I am aware of your journey and I applaud your perseverance.
Hats off!