• LUCZORAMA SHIPWRECK SCAVENGER HUNT GIVEAWAY. 4 Weeks of Fun • 1 Legendary Prize ((OcCre’s Fram Ship)) • Global Crew Welcome!
    **VIEW THREAD HERE**

Brigantine Phoenix, by Master Korabel [COMPLETED BUILD]

During the work, one line was damaged and needed replacement..

290.jpg

292.jpg

291.jpg

It was replaced and all is good again...

I also removed the ship boat as i will be adding few more details to it...

294.jpg

Which in turn, leaves a bit more space for work..

293.jpg

Another parral to build...

295.jpg


298.jpg

297.jpg

296.jpg

And continue with the sail... keeping it up with a small cloth pin...

300.jpg

301.jpg

302.jpg

Then i had to rearrange and reposition some ropes correctly.. a bit of diluted white glue to keep the ends straight and some weight till glue dries...

303.jpg

304.jpg

305.jpg

306.jpg

Happy modelling..
 
Making few blocks with a hook... first, wrapped a wire around the block, added a rope on the opposite end off the hook, twist the wire and make a hook. Then, siezing the rope and freeze it with a glue. The whole block was dropped in blackening solution. With seizing the rope and freeze it first, the blackening solution will no "blackened" the rope, because the glue will prevent solution going into the rope. It is not a bid deal if seizing is done after blackening, just rope has to be pulled a bit more so the blackened rope is removed...

324.jpg

325.jpg

326.jpg

Rigging the sprit-sail yard is next. First, the block was rigged and attached to the yard..

327.jpg

328.jpg

329.jpg

... the rope was pulled thru...

330.jpg

400.jpg


339.jpg


337.jpg

338.jpg

Few more other ropes were attached...

331.jpg

Getting crowded up here...

332.jpg

333.jpg

334.jpg

335.jpg

... and ended up on pin. I put a small amount of white glue to freeze the knot... when is dry, less visible than CA glue.

336.jpg

Extra cord length will be cut off later..

Happy modelling...
 
moreplovac said:
Making few blocks with a hook... first, wrapped a wire around the block, added a rope on the opposite end off the hook, twist the wire and make a hook. Then, siezing the rope and freeze it with a glue. The whole block was dropped in blackening solution. With seizing the rope and freeze it first, the blackening solution will no "blackened" the rope, because the glue will prevent solution going into the rope. It is not a bid deal if seizing is done after blackening, just rope has to be pulled a bit more so the blackened rope is removed...

View attachment 262832

View attachment 262831

View attachment 262830

Rigging the sprit-sail yard is next. First, the block was rigged and attached to the yard..

View attachment 262829

View attachment 262828

View attachment 262827

... the rope was pulled thru...

View attachment 262826

View attachment 262815


View attachment 262816


View attachment 262818

View attachment 262817

Few more other ropes were attached...

View attachment 262825

Getting crowded up here...

View attachment 262824

View attachment 262822

View attachment 262821

View attachment 262820

... and ended up on pin. I put a small amount of white glue to freeze the knot... when is dry, less visible than CA glue.

View attachment 262819

Extra cord length will be cut off later..

Happy modelling...
Click to expand...
Dear moreplovac
Your sails and your rigging are excellent, welldone:)Thumbsup.
 
You must log in or register to reply here.
Back
Top