HMS ENTERPRISE 1774 by RichardJJS 1:48 scale. New Kit from M.D

[Modelship Dockyard]

Thats CRAP
The Illustations are totally different from what is provided in the Kit
No doors There arnt even any illustrations So ive produced some 3D printedView attachment 553417Where is all the detail shown in the Instructions which i downloaded before buying the Kit

View attachment 553418
Then i looked at the Beams which in Branford are Great
BUT they arnt even marked
THe Instructions are available to download before buying and this is what i did

THE KIT INSTRUCTIONS are almost from another kit

I hoped this would be a model i could be proud of
Ive been building kits for 50 years
One Victory sold at Sotherbies for 5000 pounds
Just so disappinting as Ive finally run out of money

I will send photos of my Current Victory whigh i eed to Finish Rigging and a San Filepe Hull whic i built

View attachment 553419View attachment 553420

View attachment 553416

Hi Richard, please refer to the reply I provided here: https://shipsofscale.com/sosforums/...prize-1774-the-1-48-version.13661/post-473690

 

[richardjjs]

While i am waiting for the Hawse Pieces i decided to start Cutting the BEAMS
So Its the instructions that are not good
With help there are three sets of Beams
D1 and D2 LOWER DECK the illustration show how to cut a (Fore) and b Stern Cut outs for Carlings
D3 and D4 GUN DECK
E1 Is UPPER DECK
Unlike the Brandford where its a sandwich of 1Thin 1 Medium and 1 Thin which puts the Cut outs on the beam correctly placed
I guess because of wood colours people didnt like this so we cut them out ourselves
Once i worked it out its VERY easy made a jig for 4mm Carlins and flicked the middle out with a number 22 blade (Which id curved)

I Just wish it was in the instructions Not everybody has build POF Ships