-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
HMS ENTERPRISE 1774 by RichardJJS 1:48 scale. New Kit from M.D
- Thread starter richardjjs
- Start date
- Watchers 19
Well, finished well top, tricky., second one, mostly because it took some head scratching to mill posts on correct sides to fit slats.
Directions show door on side, I have other refrences showing it front / back, so that’s what I followed.
Only dry fit to insure spacing between decks, now back to finish everything on lower deck and 2-3 coats of finish.
On gun deck, nice to have sheets for carlings……able to cut clean notches before installing them.
So far, while there have been challenges and the need to scratch a few pieces, this has been a rewarding project.
While still quite a ways off, hopefully Victor will update on availability of friezes.
Tim
Directions show door on side, I have other refrences showing it front / back, so that’s what I followed.
Only dry fit to insure spacing between decks, now back to finish everything on lower deck and 2-3 coats of finish.
On gun deck, nice to have sheets for carlings……able to cut clean notches before installing them.
So far, while there have been challenges and the need to scratch a few pieces, this has been a rewarding project.
While still quite a ways off, hopefully Victor will update on availability of friezes.
Tim