Hms Vanguard 1787 1:72 - Victory Models/Amati

Hi all
It's monsoon season in darwin and it's been hammering down all night and today .
So over the last 2 weeks just been filling and sanding ,then happy with that I put on a sanding sealer which made it come up great .
Now I'm doing the lower gun ports as it says to recess these 1 mm for the gun port lids and the outer layer is 1 mm .all good happy modelling and onwards with the gun ports
Cheers snowy 20200122_111729.jpg20200122_111723.jpg20200122_111715.jpg20200122_111709.jpg
 
Hi guys work is slowing down my shipbuilding ,that's life, but all good just about finished gun ports .I'll leave the top back 4 and also leave the top 2nd planking until the deck is on
Cheers

20200220_164143.jpg
 
Last edited by a moderator:
Hi all
Just an update
I got all the gun port patterns finished ( bar the ones without lids they are 2 be done after 2nd planking) + I added the quarter galleries patterns now it's time 4 the 2nd planking I added the front toiletries so I could plank up to them all good up to now
Cheers snowy and happy modelling oh.by the way one of these photos is the amati drakker which I just started as an in between as I only do a few 2nd planking per day to let them go off and dry
Cheers 20200301_151528.jpg20200301_151512.jpg20200301_151504.jpg20200301_151457.jpg
 
Very good progress, Snowy and good luck for your second planking. What timber did Amati supply for the final layer?

Also, if you don't mind, can you start a new thread for Amati's Drakar. I would follow your thread for sure. That would be great. :)
 
G'day me maitees
Still doing the 2nd planking so I thought I would move on to other objects that will have to be attended to .i have finished the binnacle and the ships bell and I did the gun ports separately as I wanted overhang the same as on the top and bottom
Cheers snowy and everyone stay safe20200407_163908.jpg20200407_102548.jpg
 
G'day brian
Yeah mate I'm still thinking she will become the bellerphoron.
And yes it's an amati- victory kit so there will be copper plates .
The paint scheme I'm still thinking about as it's either nelson chequer style or a bit of both as shown on plan20200422_075905.jpg
20200422_075905.jpg20200422_075900.jpg
 
G'day all
Well with coronavirus I've had heaps of time on my hands.
So I finished the 2nd planking and the Wales and now just put on the down strakes for the boats now sure of part names .
Now time to sand down and tape off before painting ,then the copper
Take care all and see you all on next update
Cheers snowy 20200501_161945.jpg20200501_161906.jpg20200501_161902.jpg20200501_161857.jpg
 
Hi all
Has been a while but work has picked up a bit .
In the meantime I have been able to finish one side of the copper tiles ,and what a mission .I decided to do a minor overlap with the tiles . All good now to the other side .
I will say it was tricky buisness and after much research she has ended up like this
Happy modelling all
Cheers snowy 20200613_123926.jpg20200613_123920.jpg
 
Back
Top