I wanted to show you the etching parts of the kit, so that you get also an impression about this elements.
-
LUCZORAMA SHIPWRECK SCAVENGER HUNT GIVEAWAY. 4 Weeks of Fun • 1 Legendary Prize ((OcCre’s Fram Ship)) • Global Crew Welcome!
**VIEW THREAD HERE**
Hi Uwe,
just catching up on your build log. Vey impressed with your progress my friend.
regards Brian.
just catching up on your build log. Vey impressed with your progress my friend.
regards Brian.
Hallo my friend,
Many thanks for your visit of my log and your kind words.
I am trying to work 1 or 2 hours every day on my ship, if everybody of family is sleeping.
Hope to see you again soon....
Hi Uwe,
That must be a silent spindle sander
That must be a silent spindle sander
I am working in a separated room in the cellar, so I can also work with the table saw during the night.
But also the sander and vac are very silent.......when I buy a machine I am looking realy very much at the noise pollution.......also because of me
But also the sander and vac are very silent.......when I buy a machine I am looking realy very much at the noise pollution.......also because of me
More or less all frames are now prepared with fitting notches in the floor timbers towards keel and keelson.
I have sanded and beveled the frames inside and outside only in the areas close to keel and keelson, the rest I plan when all are fixed together to be a stiff and stabile hull structure.
Everything still dry fit, so the frames and keelson are laying only on top of keel.
On these photos you can see the last frames close to the stern
Total view in both directions
Wooden walls - like I wrote before: final sanding will be done when the hull is stiff, with this I hope, that the final appearance of the hull surface will be better, due to the fact, that the sanding tools will have every time contact with minimum 2 or 3 frames and not only one, when you sand them separately.....let us see
To be continued.......
I have sanded and beveled the frames inside and outside only in the areas close to keel and keelson, the rest I plan when all are fixed together to be a stiff and stabile hull structure.
Everything still dry fit, so the frames and keelson are laying only on top of keel.
On these photos you can see the last frames close to the stern
Total view in both directions
Wooden walls - like I wrote before: final sanding will be done when the hull is stiff, with this I hope, that the final appearance of the hull surface will be better, due to the fact, that the sanding tools will have every time contact with minimum 2 or 3 frames and not only one, when you sand them separately.....let us see
To be continued.......
Lookingreatmate!
Congratulations on the amazing work that you have done up till now.Havagoodone
Greg
Impressive to see Uwe.
Hi Uwe,
I admire your patience and workmanship.
I admire your patience and workmanship.
some short status report.....
I finalized the finetuning works so that the frames are fitting to the keel- and also keelson-elements,
so I removed all the frames out of the jig and temporary stored them as usual as "towers".
Here you can more clearly see what I did with the frames the last week.
The first photo the status some three weeks ago
Todays status
THe colour of the timber did not change.....I have to find out the best way to make photos with the most natural appearance of the timber
The next step for (hopefully) tomorrow is the final assembly of the keel elements, the stern is still separate parts
to be continued......
I finalized the finetuning works so that the frames are fitting to the keel- and also keelson-elements,
so I removed all the frames out of the jig and temporary stored them as usual as "towers".
Here you can more clearly see what I did with the frames the last week.
The first photo the status some three weeks ago
Todays status
THe colour of the timber did not change.....I have to find out the best way to make photos with the most natural appearance of the timber
The next step for (hopefully) tomorrow is the final assembly of the keel elements, the stern is still separate parts
to be continued......
Today I want to show you some small negative, but still negative quality issues of the kit.
Like mentioned already by ADC and also myself are the thickness of some parts of the keel not accurate.
It is sometimes only some micrometers, but it would be not necessary if the timber sheets would be thickened with a little bit more accuracy.
You can see this at the stern elements marked with black arrows......
A second issue is shown with the white arrows. This element is complete 6mm thick, glued by three elements in sandwich construction. Positive is, that with this sandwich construction, the notches for the feshion pieces are produced.
But it is a mystery, why the outer elements are 2mm too short.........nobody knows.......OK: it is the area where the thickness has to be reduced by 1,5mm for the rabbet, but there is 2mm gap -> means I have to fill this gap with some wood .......
....... so nobody is perfect - also not the Salamandre kit
Like mentioned already by ADC and also myself are the thickness of some parts of the keel not accurate.
It is sometimes only some micrometers, but it would be not necessary if the timber sheets would be thickened with a little bit more accuracy.
You can see this at the stern elements marked with black arrows......
A second issue is shown with the white arrows. This element is complete 6mm thick, glued by three elements in sandwich construction. Positive is, that with this sandwich construction, the notches for the feshion pieces are produced.
But it is a mystery, why the outer elements are 2mm too short.........nobody knows.......OK: it is the area where the thickness has to be reduced by 1,5mm for the rabbet, but there is 2mm gap -> means I have to fill this gap with some wood .......
....... so nobody is perfect - also not the Salamandre kit
Uwe,
these errors are annoying for sure but the builder should have some fun sometimes... Anyhow in percentage terms there don't seem to be too many errors like this in this kit, so at the end they are still of good quality! American and European kit builders should be learning from these manufacturers - but they don't seem to be!
Janos
these errors are annoying for sure but the builder should have some fun sometimes... Anyhow in percentage terms there don't seem to be too many errors like this in this kit, so at the end they are still of good quality! American and European kit builders should be learning from these manufacturers - but they don't seem to be!
Janos
I echo your statement Janos. These Chinese kits are still amazing with the extras, that are not included in the high end western world manufacturers.
Greg
Hello Uwe , these are minor errors for such a complex kit, my Mantus Santa Maria is a complete joke compare to this.
Zoltan
Zoltan
Thanks for your replies...... and I agree, that these are minor problems and it is making the built more interesting, due to the fact that you have to think first, before you do something.
@ADC : if yours are fitting, there are only two possibilities - I made a mistake, but in this regard I do not think so (in moment), and / or definitely the kit producer is not extreme accurate with the thickness of the timber, and / or there are different stages of kit improvements supplied by the kit producer.
If you check the photos of building logs f.e. on the Chinese web-page showing a different construction with different forms of the stern elements........but no problem - these are first class problems which can be easily solved.....
@ADC : if yours are fitting, there are only two possibilities - I made a mistake, but in this regard I do not think so (in moment), and / or definitely the kit producer is not extreme accurate with the thickness of the timber, and / or there are different stages of kit improvements supplied by the kit producer.
If you check the photos of building logs f.e. on the Chinese web-page showing a different construction with different forms of the stern elements........but no problem - these are first class problems which can be easily solved.....
Yes, the Chinese manufacturers have to realize that not all of their customers can read Mandarin. At the other hand their customer service does not look bad. I did not buy anything from them but on the basis of others' experience at least Max from ZHL seems to be very responsive.
Janos
Janos
Yes, correct. The customer service by Max is realy good.
Referring the manuals......I would be happy if there would be something in mandarin written
-