Frames: Done ! 
. Now i have to plug in 6000 Bolts.
. Now i have to plug in 6000 Bolts.
-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
Le Redoutable 1/48
- Thread starter Olivers Historic Shipyard
- Start date
- Watchers 49
-
- Tags
- le redoutable
- Joined
- Apr 20, 2020
- Messages
- 6,138
- Points
- 738
wow, it's looks excellent workFrames: Done !
View attachment 262649View attachment 262650View attachment 262651View attachment 262652View attachment 262653
Oh my. She's going to be a beast! It's a privilege to watch you work.
Oliver there you'll be busy until Christmas, but no gain without hard work
Thank you all for all the nice comments.
@Tobi,
Christmas yes, but which year im not sure...
@Tobi,
Christmas yes, but which year im not sure...
The photos of your tower are amazing - and already you can be proud, that you finished this part of your project.
Only 6.000 bolts ?!?!
Imagine if you would build a 110 gunner -> such a ship would have much more
Lucky you that the Redoutable was "only" a 74-gunner
So no complains, ran an die Arbeit!
BTW: Looking at your idea with the small Proxxon sander i will also take mine out of the shelf and will adjust mine like you did. Usually I am using only my bigger Hegner but for such corners like you showed it is a very good idea...... many thanks for showing us this small but very effective adjustment
Only 6.000 bolts ?!?!
Imagine if you would build a 110 gunner -> such a ship would have much more
Lucky you that the Redoutable was "only" a 74-gunner
So no complains, ran an die Arbeit!
BTW: Looking at your idea with the small Proxxon sander i will also take mine out of the shelf and will adjust mine like you did. Usually I am using only my bigger Hegner but for such corners like you showed it is a very good idea...... many thanks for showing us this small but very effective adjustment
Thank you Uwe.
But this tiny little two-decker kills my workbench. Its a good project for advanced beginner, i think bigger ships i don´t will build in the future.
But this tiny little two-decker kills my workbench. Its a good project for advanced beginner
, i think bigger ships i don´t will build in the future.
Head of the knee
Einmal ganz ehrlich: wieviele Versuche hast du gebarucht, dass diese Genauigkeit der Fugen erreicht wurde?
WOW
To be quite honest: how many attempts did you need to achieve this accuracy of the joints?
WOW
WOW
To be quite honest: how many attempts did you need to achieve this accuracy of the joints?
WOW
What I wanted to express: First class work with a triple AAA+
Agreed Uwe. The joinery is AMAZING.
I really hope, that Oliver will explain in which order he worked
and explain more in detail the way and used methods and tools to acchieve such a precise work
and explain more in detail the way and used methods and tools to acchieve such a precise work
Thank to all for the likes and comments. To speak the truth, it was the work from maybe 10 hours. It´s is the benefit from my first fail with the Bonhomme Richard three years ago and my experience with the La Belle.
@Uwek
its to difficult to explain in words. I used the FF230 for the straight surfaces, and the spindlesander/tablesander for the curves. Nothing is done with hand !!!
You have to split the whole parts into little areas and to think which part combines with which other part. Which area you can join easy with which other area.
Then you start. Sometimes i milled a surface with 0,05mm, checked it with tho other part, milled another 0,05mm .... five times....
You have to keep calm. If you need to much you will fail. Thats the basic for the whole hobby i think.
its important to think a lot about the order how to adjust of the single pieces.
its to difficult to explain in words. I used the FF230 for the straight surfaces, and the spindlesander/tablesander for the curves. Nothing is done with hand !!!
You have to split the whole parts into little areas and to think which part combines with which other part. Which area you can join easy with which other area.
Then you start. Sometimes i milled a surface with 0,05mm, checked it with tho other part, milled another 0,05mm .... five times....
You have to keep calm. If you need to much you will fail. Thats the basic for the whole hobby i think.
its important to think a lot about the order how to adjust of the single pieces.
Head of the knee: Done !
Brilliant thickness sander!?!
Impressive Oliver, very clean and fine the whole thing.
Oliver, this is fantastic. It turned out great.
Very clever idea and simple solution with this small Sanding jig
-> so you can be sure that the complete element will have the same thickness
And btw: very good result
-> so you can be sure that the complete element will have the same thickness
And btw: very good result