• Win a Free Custom Engraved Brass Coin!!!
    As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
  • PRE-ORDER SHIPS IN SCALE TODAY!

    The beloved Ships in Scale Magazine is back and charting a new course for 2026!
    Discover new skills, new techniques, and new inspirations in every issue.

    NOTE THAT OUR FIRST ISSUE WILL BE JAN/FEB 2026

Modelship Dockyard - New Kit [Modelship Dockyard] PoF H.M.S. Enterprize 1774, the 1/48 version!

Corsair said:
Glad I could help you find it. :)
Click to expand...
Copied from my Post
OK GUYS
Not seen any on here for a few days hope you are all OKM
Trying to find the numbers for the STEP 65 Lower DEck Wateways and Fittings
Fittings seem to be 3m square (With gratings ??)
But i assume the waterways are shaped

Thinking Ahead How are the mast Mounted - There are blocks With HOles - unnumbered which i presume go somewhere
BUT!

Thanks and happy new Year
 
VICTOR PLEASE
REALLY not happy
Started the Lower DEck Bulkheads
They are STEP 63 and LOWER DECK BULKHEADS
No problems but
The Parts are Lettered on 63
but not on the PLan
Anyone got a later plan that shows the Letters
Orlop desk id not good as im not sure i got in right
ALSO i have no 4 x 4mm square
Ive already purchased 6 metres
 

Attachments

richardjjs said:
VICTOR PLEASE
REALLY not happy
Started the Lower DEck Bulkheads
They are STEP 63 and LOWER DECK BULKHEADS
No problems but
The Parts are Lettered on 63
but not on the PLan
Anyone got a later plan that shows the Letters
Orlop desk id not good as im not sure i got in right
ALSO i have no 4 x 4mm square
Ive already purchased 6 metres
Click to expand...
Richard....not Victor, but.
Lower deck bulkheads have no part numbers found on parts sheets.
This numbers relate to what should be on sheet #5 but missing.
Really not a big issue, if you measure up length on sheets, it's pretty obvious where they lie, allowing for slight angles on long walls with doors,all made from strip.
Again, be sure to insure height fits "your hull".

P.S. use 3x3 strips, makes no earthly difference.

Tim
 
Last edited:
TRS7139 said:
Richard....not Victor, but.
Lower deck bulkheads have no part numbers found on parts sheets.
This numbers relate to what should be on sheet #5 but missing.
Really not a big issue, if you measure up length on sheets, it's pretty obvious where they lie, allowing for slight angles on long walls with doors,all made from strip.
Again, be sure to insure height fits "your hull".

P.S. use 3x3 strips, makes no earthly difference.
Click to expand...


TRS7139 said:
got no 3x3 either 4x4 will make a difference as ive cut slots for 4 x 4
Yes now I know i have lightly fitted the beams foromm13 to stern Hoping to work out which long bulkhead is at back
The longer side one appers to be stern as it fits side of ship
Click to expand...


TRS7139 said:
Tim
Click to expand...
 
Different construction, buddy, no slots of any kind on those bulkheads.
Again, should be mentioned, with a saw, even inexpensive one, which should be essential tool for most ship projects, you can rip whatever you need…..right from edges of parts sheets.
All those sheets have lots of matching wood for supplemental odds and ends.
Cannot count how many extras sourced from those sheets.
 
OK, little side project since I did basic assembly & paint on stove for a little distraction.
Did a bit work/paint on beech sheet for brick base under stove.
Still have to part off &edge finished, maybe a bit more dry brushing.
What do you folks think?

Tim

IMG_0820.jpeg
 
  • Like
Reactions: Ken
Glad to help Tim. I need to try dry brushing next time, thank YOU. I usually just partially mix a little bit of brown and black in with a dark red but only a rough stir so it is streaky, not a smooth single shade throughout. One of those things that the worse the effort in mixing the better the results. :)
Allan
 
You must log in or register to reply here.
Back
Top