Purchased shortly ago / sthg new in your workshop -> present it here

@donfarr
nl.aliexpress.com

21.41US $ |Pro Electric Nail Boor Manicure Machine Set Nail Art Apparatuur 35000Rpm Voor Manicure Pedicure Nail File Gereedschap Polish Bits|Elektrische Manicuur Machines & Accesoires| - AliExpress

Smarter Shopping, Better Living! Aliexpress.com
nl.aliexpress.com nl.aliexpress.com

nl.aliexpress.com

7.18US $ 8% OFF|3 Soorten Elektrische Manicure Boor Accessorie Voor Sterke 210 Marathon Micromotor Polijsten Handstuk Beroep Spantang 1Pcs|Elektrische Manicuur Machines & Accesoires| - AliExpress

Smarter Shopping, Better Living! Aliexpress.com
nl.aliexpress.com nl.aliexpress.com
plus
nl.aliexpress.com

3.64US $ 25% OFF|Sterke 210 Micromotor Verzamelen Mouwen Adapter Micromotor Handstuk Chuck Converter 2.35Mm Naar 3.175Mm 2.35Mm Tot 3.0Mm handstuk|Elektrische Manicuur Machines & Accesoires| - AliExpress

Smarter Shopping, Better Living! Aliexpress.com
nl.aliexpress.com nl.aliexpress.com

and eventual extra drill

nl.aliexpress.com

13.63US $ 40% OFF|Professionalelectric Nail Art Boor Pen Handvat Bestand Polish Grind Machine Handstuk Manicure Pedicure Tool Nail Boor Accessoires|Elektrische Manicuur Machines & Accesoires| - AliExpress

Smarter Shopping, Better Living! Aliexpress.com
nl.aliexpress.com nl.aliexpress.com
 
OK ALL MY ORGAN GRINDER PLANK BENDING TOOL CAME IN FROM ENGLAND, IT IS EXACTLY THE SAME AS WHAT MICRO MART USED TO HAVE THE EXPENSIVE PART WAS SHIPPING TOTAL COST WAS THE SAME AS WHAT MICRO MART SOLD IT FOR HAVE TRIED IT A BIT 1/16 INCH PIECE WITHOUT WETTING TOOK LESS THEN 2 MINUTES TOOK 1O TO FIGURE OUT HOW IT WORKS, LOL, IT SAYS IT CAN TAKE UP TO 1/8 INCH MATERIAL THAT MAY BE PUSHING IT A BIT MOST OF MY PLANKING IS 1/16 INCH HOPE IT WORKS ON THE HALF HULL CUTTER EXTREME, VERY EXTRME BENDS AT BOW HOPE FOR THE BEST. GOD BLESS STAY SAFE ALL DON

20210419_190154.jpg
 
Last edited by a moderator:
YEA SO FAR, I WILL TAKE SOME PICTURES OF SAMPLES OF DIFFERENT WOOD AND THICKNESS, HAVING SOME PROBLEMS WITH 3/32 INCH WALNUT, IT JUST HAVE TO PLAY WIT IT SOME TO GET THE FEEL, THE INSTRUSTIONS SAY YOU ONLY HAVE TO DAMPEN THE WOOD AND NOT SOAK IT, I HAVE RU THE WALNUT IN SOME HOT WATER AND IT SEEMS TO WEAKEN THE WOOD WHERE IT SNAPS DRY BEND SEEMS TO BE BETTER DO NOT KNOW WHY, SO SOME EXPERIMENTING, THE ONLY THING -PLASTIC IS THE HANDEL GEARS WOULD HAVE BEEN BETTER IF NOT PLASTIC THIS IS THE SAME TOOL MICRO MART USED TO SELL I GOT THIS ONE FROM CHRONOS TOOLS ENGLAND, THE SHIPPING WAS HALF THE PRICE OF THE TOOL EXPENSIVE SHIPPING BUT IT WORKED OUT THE SAME AS MICRO MART WAS SELLING IT $150.00 HOPE IT WORKS OUT THAT HALF HULL/CUTTER HAS EXTREME BENDS AT THE BOW. GOD BLESS STAY SAFE YOU AND YOURS DON
 
donfarr said:
OK ALL MY ORGAN GRINDER PLANK BENDING TOOL CAME IN FROM ENGLAND, IT IS EXACTLY THE SAME AS WHAT MICRO MART USED TO HAVE THE EXPENSIVE PART WAS SHIPPING TOTAL COST WAS THE SAME AS WHAT MICRO MART SOLD IT FOR HAVE TRIED IT A BIT 1/16 INCH PIECE WITHOUT WETTING TOOK LESS THEN 2 MINUTES TOOK 1O TO FIGURE OUT HOW IT WORKS, LOL, IT SAYS IT CAN TAKE UP TO 1/8 INCH MATERIAL THAT MAY BE PUSHING IT A BIT MOST OF MY PLANKING IS 1/16 INCH HOPE IT WORKS ON THE HALF HULL CUTTER EXTREME, VERY EXTRME BENDS AT BOW HOPE FOR THE BEST. GOD BLESS STAY SAFE ALL DON

View attachment 228550
Click to expand...
Looks like a very interesting tool. I will pleased to see any report you can give to it's effectiveness.
Thanks Allan
 
MINE HAS THE PLASTIC GEARS, THE METAL WOULD BE MUCH BETTER, SO FAR I HAVE NOT HAD TO STEAM OR EVEN OR KEEP IT UNDER WATER FOR A LONG PERIOD JUST RUN IT THROUGH AND FINGER WIPE IT DOWN, IT SAYS IT CAN BEND WOOD UP TO 1/8 INCH THICK I THING THAT IS PRESSING IT RIGHT NOW BENDING SOME 3/32 INCH WALNUT DOING OK BUT NEED MORE BEND AT THE BOW, THE ENGLISH CUTTER/HALF HULL HAS EXTRME BENDS AT THE BOW, AGAIN WILL SHOW SOME SAMPLES. GOD BLESS STAY SAFE YOU AND YOURS DON
 
One week ago I was getting frustrated with my soldering works one some ovens of my Le Coureur.
Partly my own imperfect experience with soldering was quility, but I found (better for my ego) the main reason in my cheap soldering station.
The iron and the solder made everything, but not what they should do....... so I decided to order a new and better soldering station

It arrived some days ago and here is my new one "Ersa RDS 80" - so now I have no excuses any more

IMG-6154.jpg

IMG-6156.jpg

IMG-6157.jpg

www.kurtzersa.com

RDS 80 - Soldering & Desoldering Stations

www.kurtzersa.com www.kurtzersa.com


In addition I ordered from the same dealer also a new set of six antimagnetic tweezers from company BERNSTEIN

IMG-6155.jpg

Tweezers by BERNSTEIN

Tweezers for precision work or for working on ESD components - here you will find all the special tweezers for your requirements.
www.bernstein-werkzeuge.de www.bernstein-werkzeuge.de
 
You must log in or register to reply here.
Back
Top