• "LUCZORAMA SHIPWRECK SCAVENGER HUNT GIVEAWAY RAFFLE"
    Luczorama is proud to launch a 4-week scavenger hunt giveaway packed with creativity, laughs, and nautical nonsense. Explore historic ships, solve easy clues, and have some fun with fellow builders. Complete weekly missions to earn raffle entries — the more you join in, the better your chance to win a Fram model ship by OcCre!
    **VIEW RULES HERE**

Purchased shortly ago / sthg new in your workshop -> present it here

I was looking for a heart shaped block this morning which caused to to think about posting something else I added to my workshop a few months ago. Maybe just due to old age, but kept forgetting about small ship parts that I have and where I put them. I purchased a set of drawers from amazon to organize things. This worked out so well, and I still had parts to organize that I bought another. I had originally put small labels on the drawers, but still found that a litlle awkward. So, I made a text document that I can sort alphabetically. As I still find small parts in places I forgot, I'll add them to the bottom of the list, later add them to my text document, re-sort and re-print the list.

I also bought a couple different size of drawer dividers. Link to one is below.

https://www.amazon.com/gp/product/B0CK6HP2HY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B0BTHDXCD5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

IMG_4412.JPG
IMG_4411.JPG

IMG_4413.JPG
 
Last edited:
I usually use the 1 or 2 setting. Settings are 1-5. Sure doesn't seem like 5k, but I'm only guessing The slower the speed the less the torque. In the photo above I drilled a 1.0mm hole in the 3/8" mast and it drilled fine. Harder woods you would probably need a higher rpm. I use a smaller bit (something like .6mm) on setting 1 to drill out the holes a little larger in rigging blocks. Sometimes the drill doesn't have enough torque at the 1 setting, I then increase the speed to get more torque.
 
They sell Plug-n-Play rheostat control units, some are hand adjustable and one found for $36 USD is foot controlled.

You plug it into wall and the item to be controlled plugs into it and press the pedal like Admirals sewing machine.

 
I want momentary because I have shaky hands. I center punch where I want to drill, set the point of the drill into the punch mark, then I want to touch the button to turn it on. On/off switches just seem to be too heavy and I push the bit out of the mark. Also a lot of drills have a wobble to them so I have trouble starting the drill and then trying to get it into the punch hole. Hopefully I can find a momentary foot switch. I guess because Dremels are mostly used for continuous grinding type stuff they correctly used an om/off switch. I just wish they had used both. Actually a mouth switch would be ideal. I think. Maybe I could just hold the two bare wires in my teeth and just short them out with my tongue to turn it on. Yeah, that would work o_O
 
The first 2 on the list are momentary. When you take your foot off they stop. The third is an on/off switch. Press to start/press again to stop. I use the on/off on my saws/thickness sander/ect and the momentary on the dremels/sanders.
 
Ultimation: It just arrived at the door. My old slicer was ready for retirement, only after one ship build. In addition, wood thicker than 1mm had a fighting chance... not anymore.

I wanted quality, sturdiness and something that would last. No joking about the quality and the precision. I just added a small base to increase the footprint (nothing big or fancy). It had a tendency to rock a little when not clamped. With this, no clamping needed.

Note: after using couple of times, I noticed very minor scratch in places where metal was touching metal. I since added a layer of sturdy transparent tape underneath few parts touching metal. That solved it without issues.

After watching multiple reviews and comments later... and a slimmer wallet.

IMG_2503.jpeg

IMG_2504.jpeg

IMG_2508.jpeg
 
Last edited:
Took the plunge with the Admiral’s enthusiastic approval to purchase a WEN 3410 Air Filtration System. Actually, at around $ 140.00, it was a very necessary addition to my very tight “in a closet” shipyard.

My biggest concern was the noise level but fortunately, it is a very low hum of the air moving at 300 CFM, an overkill for such a small space.

Despite having a shop vacuum when using the sander and other tools the sawdust and dust was quite overwhelming I hope this to be the right answer.IMG_4740.jpegIMG_4744.jpeg
 
Ultimation: It just arrived at the door. My old slicer was ready for retirement, only after one ship build. In addition, wood thicker than 1mm had a fighting chance... not anymore.

I wanted quality, sturdiness and something that would last. No joking about the quality and the precision. I just added a small base to increase the footprint (nothing big or fancy). It had a tendency to rock a little when not clamped. With this, no clamping needed.

Note: after using couple of times, I noticed very minor scratch in places where metal was touching metal. I since added a layer of sturdy transparent tape underneath few parts touching metal. That solved it without issues.

After watching multiple reviews and comments later... and a slimmer wallet.

View attachment 466052

View attachment 466053

View attachment 466054
Received both mine last month. Invaluable additions to the “dockyard” :)
 
Today I received my blocks and cleats necessary for my HMS Granado - ordered from @Dry-Dock Models & Parts

the best possible quality and service - Many Thanks

Hope to make some better photos in some time, but you get a impression about the quality


View attachment 463083

View attachment 463084 View attachment 463086

View attachment 463085 View attachment 463087

View attachment 463088
Good morning Uwek, I’m waiting for my section 3 of me GRANADO. If not to much trouble, would you be willing to share the quantities and sizes your order from Drydock so fire off an order as well.

Thanx and have a Great Navy Day

David
 
Back
Top