Here is a full length shot of the ship
Last edited by a moderator:
-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
Trumpeter 1/200 Bismarck Build [COMPLETED BUILD]
- Thread starter Jim Lauser
- Start date
- Watchers 10
Next to be done was the airbrushing of the white and black stripes up the forward superstructure, the funnel, and the rear superstructure. This pic shows the masking of all the pieces so that the white stripe can be applied.
Next, the white masking is removed and the black masking is applied.
And finally, all of the masking is removed, revealing the finished camo stripes.
That is just awesome watching this come together. Great job Jim !!!
Donnie
Donnie
Now that all of the painting was done, the next step was to finish the application of the wooden decking.
Application of the Photo-etched pieces on the superstructures was the next step. The next three pics show the application on the first level of the forward and aft superstructures. This pic is of the first level of the forward superstructure. The porthole covers, doors, and some of the guns have been installed. Note also the railings. These are supplied in 0.2mm sheets of brass photo-etched parts. Every one of the railings had to be bent and rounded to conform to the profile of the piece they are to be mounted on
.
.
Last edited by a moderator:
This pic of the midship first level shows more detail of the PE application. Note the catapults in the middle for the seaplanes to be added later.
This is the aft section of the
first level
first level
Here is the same pic from a higher angle
.
.
These next three pics are meant to show the detail of one of the assemblies, the Admirals Bridge. This pic is a front view.
Here is a side view
.
.
And here is a rear view
.
.
Here is the completed forward superstructure and funnel.
This is the same view from a higher angle
.
.
A detailed view of the funnel
.
.
A pic of the completed aft superstructure.
The PE pieces that make up the deck of one of the ships boats.
The completed assembly
The ships boats mounted on their bases.
