YQ Bluenose Ted R

Ted Robinson said:
I intend to stretch the back stay,
Click to expand...
Hello Ted, the challenges this ship presents just keep coming but that's the fun of it. When you talk about stretching the backstays it sounds as if you are going to put a great amount of force in the line. Be careful it is actually fairly easy to pull the mast out of plumb without realizing it. For me only I have a rule of pulling a line whether it be backstay or shroud line taught but not tight.
 
Henk Liebre said:
Hello Ted,

I read your posts from the past

If I follow you, it seems like you want to start with the shrouds, but maybe I'm wrong.

I would advise you to follow the plans.

On page 8-5, the lines are shown to get the masts in a stable position, I would do that first.

Johan also explained this in his post what the reason is for this

YQ Bluenose by Johan [COMPLETED BUILD]

Hi Johan, naturally the hardest block to make is the best looking one (to me) with the wire strop.
shipsofscale.com

# 1136

Rigging is also new to me and I encountered many unknown things.

What I did to make it my own:

I read all the posts from fellow builders several times and tried to understand how they did this and in what order and why.

A good source is:


suburbanshipmodeler.com

Rigging Begins

Day 448. Fact check…I’m not great at rigging. Rigging is a pretty specific skill, unique to model ship building, and this is only my second build. On my Phantom build, I kinda rushed …
suburbanshipmodeler.com suburbanshipmodeler.com

It also (I think) clearly explains how you can make the shrouds.confirm

There are more lines shown there than the YQ plans but it does give a good idea of the rigging

It is explained in several sources that rigging the BN is not easy, which I agree with

I have a lot of respect for your perseverance, and not everyone shows their mistakes on the forum and you do

There is a Dutch saying::”Waar een wil is een weg”

Where there is a will there is a way

(Translated) If you if you want to achieve something there is a way to achieve it

Happy holidays Ted


Regards
Henk
Click to expand...
Thank you Hank and Happy Holidays to you and your family.
I appreciate the resource you sent me and have saved it to my home page for constant reference.
Best regards
Ted
 
Daniel20 said:
Hello Ted, the challenges this ship presents just keep coming but that's the fun of it. When you talk about stretching the backstays it sounds as if you are going to put a great amount of force in the line. Be careful it is actually fairly easy to pull the mast out of plumb without realizing it. For me only I have a rule of pulling a line whether it be backstay or shroud line taught but not tight.
Click to expand...
Thank you @Daniel20. Installed all the shrouds on the fire mastorior to putting the mast on the model. I started assembling the upper deadeyes connection and rand into aproblem on the first two. I have to rethink the tool in using for the spacing.
Merry Christmas to you and your family.
Best regards
Ted
 
The little tool I made initially didn't work.
When I tied the second leg if the first pair of shrouds I wasn't able to tie the upper deadeye in place. So, I glued the shroud to the upper deadeye as it was in the fixture. Long story short, they came out uneven. Since I had glued the upper part of the shrouds in place,and of course the one I picked first was on the bottom. The result was a big mess.
My new plan of attack is to cut off the shroud pair that is the wrong length and install a new pair. The plans show this pair to be on the bottom at the crosstree.
The new ones will be on top, my compromise.
In addition, I made a new tool that will lock the upper and lower deadeyes in place until they are properly tied.
Fingers crossed,
TedIMG20241219082700.jpg
It was a little fiddley but I got it in place.
I think the deadeye is well located this time.IMG20241219084436.jpg

IMG20241219082646.jpg
 
Last edited:
Ted Robinson said:
The little tool I made initially didn't work.
When I tied the second leg if the first pair of shrouds I wasn't able to tie the upper deadeye in place. So, I glued the shroud to the upper deadeye as it was in the fixture. Long story short, they came out uneven. Since I had glued the upper part of the shrouds in place,and of course the one I picked first was on the bottom. The result was a big mess.
My new plan of attack is to cut off the shroud pair that is the wrong length and install a new pair. The plans show this pair to be on the bottom at the crosstree.
The new ones will be on top, my compromise.
In addition, I made a new tool that will lock the upper and lower deadeyes in place until they are properly tied.
Fingers crossed,
TedView attachment 490575
It was a little fiddley but I got it in place.
I think the deadeye is well located this time.View attachment 490578

View attachment 490576
Click to expand...
Good afternoon Ted. Clever little tool. It makes a load of difference (especially visually) when all the deadeyes are in line. Have an awesome Christmas on Wednesday. Cheers Grant
 
I was dreading doing the upper deadeyes and serving the ends but this has turned into one of the most pleasurable parts of the build. I can't overstress how easy it was to get the deadeyes absolutely even to with the little tool presented above
Happy modeling
Ted IMG20241221193721.jpg
 
You must log in or register to reply here.
Back
Top