Happy birthday Ondras!
Roter Löwe 1597 by Ondras71 - scala 1/60
- Thread starter Ondras71
- Start date
- Watchers 78
-
- Tags
- galleon roter löwe
Thank you very much my friend!!Hi Ondras. I wish you all the best and a very Happy Birthday.
I hope you can enjoy this special day with family and friends.
Thank you very much my friend!!
Thank you very much Chuck, thank you for the like.
More small blocks made..
Before I have the milling cutters ready for the production of small pulleys, I started making all the ropes. There are a lot of them, 10 basic diameters in total. All Dutch ropes are right-handed, which means that it is difficult to make weak 3x1 ropes. Left-handed threads are first twisted into right-handed threads and then the ropes are knitted. Guttermann threads are quite good, but the weaker cotton waxed Sajou threads like to hold their shape and I don't want to twist them in the opposite direction. After a long time of trying, I figured out the ropewalk settings and especially the last adjustment. All the finished ropes are slightly hairy, I stretch them under the flame of a lighter..
The 3x1 Sajou cable with a thickness of 0.35 mm also has to be pulled over the edge repeatedly to align the threads. But it works..
More small blocks made..
Before I have the milling cutters ready for the production of small pulleys, I started making all the ropes. There are a lot of them, 10 basic diameters in total. All Dutch ropes are right-handed, which means that it is difficult to make weak 3x1 ropes. Left-handed threads are first twisted into right-handed threads and then the ropes are knitted. Guttermann threads are quite good, but the weaker cotton waxed Sajou threads like to hold their shape and I don't want to twist them in the opposite direction. After a long time of trying, I figured out the ropewalk settings and especially the last adjustment. All the finished ropes are slightly hairy, I stretch them under the flame of a lighter..
The 3x1 Sajou cable with a thickness of 0.35 mm also has to be pulled over the edge repeatedly to align the threads. But it works..
You' r welcome my friend. Keep up the good work. I learn a lot from you.
Hello Ondras. Happy birthday. I am enjoying your work very much.
Bill
Bill
wish you all the best and a happiness
Happy Birthday my Friend
Thank you Stephan.
I only use cotton threads, it certainly doesn't make sense to heat them.
I tried to patina the ropes, but the cotton absorbs the paint and the result is bad.
Another disadvantage of cotton threads is that they cannot be used to weave very weak ropes..
Thank you all so much for the birthday wishes, but there's nothing left to celebrate...
- Joined
- Aug 8, 2019
- Messages
- 4,991
- Points
- 688
Better use polyester yarn to make rope. You can colour that with Judea bitume like Mat did on his Papegojan. A real good looking result.Thank you Stephan.
I only use cotton threads, it certainly doesn't make sense to heat them.
I tried to patina the ropes, but the cotton absorbs the paint and the result is bad.
Another disadvantage of cotton threads is that they cannot be used to weave very weak ropes..
Thank you all so much for the birthday wishes, but there's nothing left to celebrate...
The only thing with polyester rope is that it will unravel when you cut it, but that's why you bake it short in a oven.
Post in thread 'Pinnace Papegojan 1627 - 1/48 [COMPLETED BUILD]' https://shipsofscale.com/sosforums/...an-1627-1-48-completed-build.7055/post-160824
Post in thread 'Make your rope on a rope walk' https://shipsofscale.com/sosforums/threads/make-your-rope-on-a-rope-walk.9094/post-219002