Nice ! I'm a long way off from there. 
-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
HMS ENTERPRISE 1774 by RichardJJS 1:48 scale. New Kit from M.D
- Thread starter richardjjs
- Start date
- Watchers 13
- Joined
- Mar 1, 2022
- Messages
- 628
- Points
- 308
That' a bit annoying, mate. Did you check those parts number twice, at least?
- Joined
- Jul 24, 2016
- Messages
- 312
- Points
- 128
Yes All parts are ttally right it says on the arrow going out to the left side 4 x 3 strips
And the Shaped frames are 4mm as well
All cutting is done on main E2 16 - 13
WAiting to see if anybody else has done it
Thanks
- Joined
- Mar 1, 2022
- Messages
- 628
- Points
- 308
Nothing to do but have them from scratch, then...
- Joined
- Jul 24, 2016
- Messages
- 312
- Points
- 128
Have you looked at this
Very strange
The top 2 Pictures shoe a gap at the Top of the Platform And the Spar
The bottom two show a Gap between the Spar
Obviously Bottom is wrong
Instruction say use a 4 x3 But it looks like 4x4
- Joined
- Jul 24, 2016
- Messages
- 312
- Points
- 128
Just watched the 1:96 Video and YES there is a gap
On 1:96 the Frame is 2mm and the Carlings are 1.5 so that's correct with a gap at the top
Interestingly he use thin CA Glue My Plans are all in sleeves that go in a binder so stop the glue sticking
ONWARD AND UPWARD
On 1:96 the Frame is 2mm and the Carlings are 1.5 so that's correct with a gap at the top
Interestingly he use thin CA Glue My Plans are all in sleeves that go in a binder so stop the glue sticking
ONWARD AND UPWARD