Pretty clever detailing, Brad. This is going to look amazing when you are done!
Edit: Amazon can find your mobile home, but they can't find my static home???
Edit: Amazon can find your mobile home, but they can't find my static home???
-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering. -
SUBSCRIBE TO SHIPS IN SCALE TODAY!
The beloved Ships in Scale Magazine is back and charting a new course for 2026!
Discover new skills, new techniques, and new inspirations in every issue.
NOTE THAT OUR NEXT ISSUE WILL BE MARCH/APRIL 2026
Bomb Ketch Salamandre 1:48
Paul is incognito…..
Paul,
I feel your pain. Amazon does pretty good when we are on the road.
The US Postal Service sometimes leaves me scratching my head.
Below is the movement of a recent USPS package (I live in Loveland):
12 Feb – Dept Hartford, CT
13 Feb – Springfield, MA
14 Feb – Aurora, CO
14 Feb – Denver, CO
15 Feb – LOVELAND, CO***** (close but no cigar)
17 Feb – Seattle, WA????? (huh)
18 Feb – Portland, OR
19 Feb – Denver, CO
Delivered on 21 Feb
It gets worse and worse. Two of four grand kids' Christmas cards and gifts never showed up at their homes. One came back to us after about 45 days, the other is nowhere to be found. It's like they have hired ten thousand Newman clones.
Allan
4-day work stoppage to ski with the grandkids! PRICELESS!!!
Grandkids returned home
.
Colorado heatwave is upon us
!
We may have to switch to biking, as the snow is rapidly disappearing!
Bright side is more time to work on Salamandre
!
Grandkids returned home
.Colorado heatwave is upon us
! We may have to switch to biking, as the snow is rapidly disappearing!
Bright side is more time to work on Salamandre
!
Never too early to strap some boards on them and push them down a mountain! So jealy!
8-days of snow melt. Temps in the 60's. No new snow, so we switched to biking/hiking the beautiful mountains around Breckenridge and playing pickleball.
Two pics show some small progress on the stern structure (dry fit only):
Playing in the Mountains instead of working in the shipyard.
1. Red arrow shows shipyard location for the month of March (Tiger Run RV Park, Breckenridge)
2. 6-mile hike (there was 2 feet of snow here a week ago)!
3. 30-mile bike ride (1,260ft elevation gain to 9860ft):
Off to give the pickleball courts a workout!!
Two pics show some small progress on the stern structure (dry fit only):
Playing in the Mountains instead of working in the shipyard.
1. Red arrow shows shipyard location for the month of March (Tiger Run RV Park, Breckenridge)
2. 6-mile hike (there was 2 feet of snow here a week ago)!
3. 30-mile bike ride (1,260ft elevation gain to 9860ft):
Off to give the pickleball courts a workout!!
Shipyard relocated from Breckenridge to the Loveland basement.
PO Brutis blackened the mortars. At 200lbs, he is getting a workout test fitting them!
Mortars and rack will be set aside until the hull cutouts are made, so the rack doesn't get in the way of the saw blade.
Next. Aligning and glueing the stern structure.
PO Brutis blackened the mortars. At 200lbs, he is getting a workout test fitting them!
Mortars and rack will be set aside until the hull cutouts are made, so the rack doesn't get in the way of the saw blade.
Next. Aligning and glueing the stern structure.
Small progress in the shipyard. Workers were able to glue and fair the stern timbers!
They also are making progress on the first layer of the main wales.
Stern is now solid and faired in nicely! Will be nice to have the wales completed, sometime in the next week or two. Photos below:
They also are making progress on the first layer of the main wales.
Stern is now solid and faired in nicely! Will be nice to have the wales completed, sometime in the next week or two. Photos below:
Looking good Brad! What wood are you using for the wales or did you use black dye/stain?
I'll repeat everything Oliver said - including the question.
Olivier/Paul,
The wood is ebony. I ordered a box of ebony pen blanks and milled them to 1/2 thickness of the wales. Testing proved I could NOT steam/bend full thickness.
I did the same thing on my scratch build of Serapis but used an African Hardwood I picked up in a souk, while in Kenya. It was a dark brown, vice the black of ebony. Maybe Panga Panga or Wenge
We'll see how the second layer turns out. I'll be experimenting on the scarph joints for the second layer
The wood is ebony. I ordered a box of ebony pen blanks and milled them to 1/2 thickness of the wales. Testing proved I could NOT steam/bend full thickness.
I did the same thing on my scratch build of Serapis but used an African Hardwood I picked up in a souk, while in Kenya. It was a dark brown, vice the black of ebony. Maybe Panga Panga or Wenge
We'll see how the second layer turns out. I'll be experimenting on the scarph joints for the second layer
Thanks Brad. I too discovered after many different attempts that I could not get ebony to bend. Great idea to use thin planks and layer them up.
Hey Brad - its not to early to start thinking about how you will approach your planking. The tuck on these ships is especially difficult - I am currently in this battle. Using ebony or in my case black hornbeam makes it more challenging.
Many French models mimic the waterline by planking ebony or hornbeam to the waterline which means you will need to figure out a way to bend it or carve it to meet the extreme curve on the tuck. Also you will be faced with creating the straight black line between pear and ebony at the waterline.
I decided on my model to plank pear right below the wales - its more of a classic approach. Also it makes the tuck easier to plank with pear vs ebony or hornbeam. Its still difficult and I am using layers but is much more approachable in my opinion.
Good luck which ever route your choose,
Chris
Many French models mimic the waterline by planking ebony or hornbeam to the waterline which means you will need to figure out a way to bend it or carve it to meet the extreme curve on the tuck. Also you will be faced with creating the straight black line between pear and ebony at the waterline.
I decided on my model to plank pear right below the wales - its more of a classic approach. Also it makes the tuck easier to plank with pear vs ebony or hornbeam. Its still difficult and I am using layers but is much more approachable in my opinion.
Good luck which ever route your choose,
Chris
Chirs,
Paul has had me thinking about this for the last few months. Below is the plan.
Cut away frames below the wales, similar to this build by Alexandru Gurau.
The flush wall-mounted backlighting is driving me to:
1. Plank and finish ALL hull details above the wales.
2. Leave both sides un-planked below the wales, so the backlighting has the best effect (like my HMS Serapis below).
The red oval is where La Salamandre will sit. It will replace the knife, displayed with Lapis Lazuli found at Bin Ladens villa in Tarnak Farms, AF, back in 2001. Tumbling the rough stones with the grandkids was a great month-long project!
Sorry for subjecting everyone to my "thinking out-loud" !
Paul has had me thinking about this for the last few months. Below is the plan.
Cut away frames below the wales, similar to this build by Alexandru Gurau.
The flush wall-mounted backlighting is driving me to:
1. Plank and finish ALL hull details above the wales.
2. Leave both sides un-planked below the wales, so the backlighting has the best effect (like my HMS Serapis below).
The red oval is where La Salamandre will sit. It will replace the knife, displayed with Lapis Lazuli found at Bin Ladens villa in Tarnak Farms, AF, back in 2001. Tumbling the rough stones with the grandkids was a great month-long project!
Sorry for subjecting everyone to my "thinking out-loud"
!