English Cutter Half Hull 1:32 scale by Mike 41 [COMPLETED BUILD]

I thought I would start my additional details with the mast. This is the progress photos up to the dry fitting, at this point I decided it would be better to start with the bowsprit. See next post for the bowsprit.

IMG_3484.jpgIMG_3485.jpgIMG_3486.jpgIMG_3487.jpg
 
The design for the bowsprit is a modified copy of the Alert and is supported with the windless and stempost, this post will cover both. The first four photos cover turning the sprit, that was the easy part. The windlass was a little more work, I also added the cathead. This is the progress photos.

IMG_3488.jpgIMG_3489.jpgIMG_3490.jpgIMG_3491.jpgIMG_3492.jpgIMG_3493.jpgIMG_3495.jpgIMG_3497.jpgIMG_3498.jpgIMG_3501.jpgIMG_3502.jpgIMG_3504.jpg
 
I have been making a little progress on my yardwork and other request by the Admiral, a couple of rainy days gave me some time on the cutter. Just aft of the windlass is the forward companionway, stove pipe, mast, and jeer these items are shown in the following photos.

IMG_3520.jpgIMG_3521.jpgIMG_3522.jpgIMG_3523.jpgIMG_3525.jpgIMG_3526.jpgIMG_3528.jpgIMG_3529.jpg
 
Thanks Jim, I will consider the plaque for Alexander.
 
The design for the bowsprit is a modified copy of the Alert and is supported with the windless and stempost, this post will cover both. The first four photos cover turning the sprit, that was the easy part. The windlass was a little more work, I also added the cathead. This is the progress photos.

View attachment 236673View attachment 236674View attachment 236675View attachment 236676View attachment 236677View attachment 236678View attachment 236679View attachment 236680View attachment 236681View attachment 236682View attachment 236683View attachment 236684
Great looking extra detail with only half the work!
 
Congratulations also from my side - your half model is looking very good
Alexander will be very very happy :cool:
 
Back
Top