• LUCZORAMA SHIPWRECK SCAVENGER HUNT GIVEAWAY. 4 Weeks of Fun • 1 Legendary Prize ((OcCre’s Fram Ship)) • Global Crew Welcome!
    **VIEW THREAD HERE**

HMS ENTERPRISE by Keith 1:48 scale. New Kit from M.D.

AllanKP69 said:
As

This framing is more like on Admiralty models than the actual ships so go with whatever works best. Even on the actual ships there were spacers at times, and the size of the spacers varied all over the place even on the same ship as the frames were set up to form the gun ports. Below example is Vengeance 1774. You can see the pieces between frames varies a lot as the siding of the frames varies from the floors to the top timbers. These spacers are only on the station lines but I have no idea why.

Allan
View attachment 534232
Click to expand...
That is brilliant - Thanks
Keef said:
Coming along with the construction of the hawse pieces. x8A and B have been faired. x8B is in its position on the keel, while x8A is placed in the jig for the hawse pieces as all the frames will attach to it. The first piece, F1 is sanded to shape, inside and out. This is the piece that attaches vertically to the hull and is the longest of the 7 frames making up the hawse pieces. It is dry fitted to the cant frame x8A and fits very nicely. F2 is also sanded to shape and takes up its position in the jig next to F1. I must be doing something right as it fits on x8A and the shape forming is instantly recognizable. All good so far

View attachment 533450

View attachment 533451

View attachment 533452

View attachment 533453

View attachment 533454

View attachment 533455

View attachment 533456

View attachment 533457
Click to expand...
On the diagram
Keef said:
Coming along with the construction of the hawse pieces. x8A and B have been faired. x8B is in its position on the keel, while x8A is placed in the jig for the hawse pieces as all the frames will attach to it. The first piece, F1 is sanded to shape, inside and out. This is the piece that attaches vertically to the hull and is the longest of the 7 frames making up the hawse pieces. It is dry fitted to the cant frame x8A and fits very nicely. F2 is also sanded to shape and takes up its position in the jig next to F1. I must be doing something right as it fits on x8A and the shape forming is instantly recognizable. All good so far

View attachment 533450

View attachment 533451

View attachment 533452

View attachment 533453

View attachment 533454

View attachment 533455

View attachment 533456

View attachment 533457
Click to expand...
On the diagram HAWSE PIECES it says "Attaching to surface Y8" I presume it means X8B !
 
TRS7139 said:
That is a fine choice.Myself, I’ve used the 2”drum with 180,
Don’t touch frames until paired and I then hold the paired frames frreehand off the table to bevel inside and out. Using the lines and char allows you to keep things nice and even. 5 minutes to bevel a full frame,
Tip: as you progress, take the bevels right down to the lines, without knowing exactly what my margin for error might be I left several just off the line but that resulted in more sanding……those lines are accurate.
My images show this result so you be the judge on process.
Click to expand...
I used a modelling drum sanded to remove the worse of the Char and Stuff that needed sanding down then Finished of with a hand held sander . Seems OK But before i glue it all in will finly sand it to gicve a clean fiish
 
Keef said:
Not thought that far ahead yet but more than likely
Click to expand...
One of the reasons I asked was about your small spacers.
If you review Allan’s image about the boxing, you can see the true size of spacing between bollards, giving more or less solid wood to go through for hawse holes.
Could be important to prevent separation of the bollards.
I have avoided the boxing but spaced similar to Arban.

Tim
 
richardjjs said:
That is brilliant - Thanks

On the diagram

On the diagram HAWSE PIECES it says "Attaching to surface Y8" I presume it means X8A !
Click to expand...
Yes Ive just checked mine - need break for FRAMES
LOts of help Keef Corsair and Arban
JUst cleaning and checking But its not easy without your guys help THANKS

Also found 2 "Missing" pieces they where in wrong box
 
richardjjs said:
That is brilliant - Thanks

On the diagram

On the diagram HAWSE PIECES it says "Attaching to surface Y8" I presume it means X8B !
Click to expand...
No. x8A is correct. x8B is on the stern side as it is with all the frames. y8 is for the stern can't frames
 
Last edited:
All the hull frames are complete and permanently fixed onto the keel, making a complete hull, except for the hawse piece assemblies, port and stbd., which are still awaiting my small repair work-in-progress. In the meantime, I have moved on to the transom. The 5 pieces are shown after sanding to shape. They attach to frame y8B and the stern post. A bit of fine tuning is involved in getting them to fit and they are very awkward to get at whilst in the jig but worked out OK in the end. btw. Almost forgot. Be aware, to achieve the angle for the cant frame y8, you must ignore the sanding line lasered onto the floor timber of y8A. This looks to be a manufacturing error

DSC00667.JPG

DSC00668.JPG

DSC00670.JPG

DSC00673.JPG

DSC00674.JPG

DSC00676.JPG

DSC00678.JPG

DSC00680.JPG

DSC00686.JPG

DSC00687.JPG
 
Last edited:
Keef said:
All the hull frames are complete and permanently fixed onto the keel, making a complete hull, except for the hawse piece assemblies, port and stbd., which are still awaiting my small repair work-in-progress. In the meantime, I have moved on to the transom. The 5 pieces are shown after sanding to shape. They attach to frame y8B and the stern post. A bit of fine tuning is involved in getting them to fit and they are very awkward to get at whilst in the jig but worked out OK in the end. btw. Almost forgot. Be aware, to achieve the angle for the cant frame y8, you must ignore the sanding line lasered onto the floor timber of y8A. This looks to be a manufacturing error

View attachment 535824

View attachment 535825

View attachment 535826

View attachment 535827

View attachment 535828

View attachment 535829

View attachment 535830

View attachment 535831

View attachment 535832

View attachment 535833
Click to expand...
Looking good Keith- nice one
 
Keef said:
All the hull frames are complete and permanently fixed onto the keel, making a complete hull, except for the hawse piece assemblies, port and stbd., which are still awaiting my small repair work-in-progress. In the meantime, I have moved on to the transom. The 5 pieces are shown after sanding to shape. They attach to frame y8B and the stern post. A bit of fine tuning is involved in getting them to fit and they are very awkward to get at whilst in the jig but worked out OK in the end. btw. Almost forgot. Be aware, to achieve the angle for the cant frame y8, you must ignore the sanding line lasered onto the floor timber of y8A. This looks to be a manufacturing error

View attachment 535824

View attachment 535825

View attachment 535826

View attachment 535827

View attachment 535828

View attachment 535829

View attachment 535830

View attachment 535831

View attachment 535832

View attachment 535833
Click to expand...
It’s always a complex part of the hull, Keith. It’s looking very nice.
Gr. Peter
 
Keith,
Looks like they turned out nice.
When I did mine, for others reference, I did them absent the last couple cant frames to get the ends to butt up against frame as evenly as I could………a bit less fidgety.

Tim
 
You must log in or register to reply here.
Back
Top