- Joined
- Oct 1, 2023
- Messages
- 1,371
- Points
- 393

![]() |
Please consider making a Donation to SOS to support our continuing growth and developement. It is greatly appreciated !!! *** Read More - - Click Here *** https://www.paypal.me/DonateSOS |
![]() |
I believe they were 8 poundersAssuming her armament was all 32 pounder Carronades, based on the drawing from Dupin the running tackle blocks were likely about 6" long. The rope would be about 2" circumference and the breech rope would be about 5 inch circumference. There is good information on tackle for long guns, but I have never been able to find definitive data on Carronade rigging. If anyone can share a source on this information that would be great. I could not find info in Falconer, Dupin, or elsewhere in other than drawings, so far.
Thanks
Allan
View attachment 516926
I saw something similar on Olha Batcherov's recent video. Interesting but beyond my abilitiesInteresting that the eyebolt and ring bolt go all the way through the bulwark; something I’ve always tried to avoid doing on my models.
Drilled theView attachment 517092 holes in the cats heads and assembled the bumpkins.
I can't seem to get accurate spacing. Need an x,y table
I just looked at photos of a dozen contemporary models at Preble Hall in Annapolis and not one shows the bolts coming out the outer planking so we are not alone in not having them come through the hull of our models. In full size construction, it makes sense to have more than just an eyebolt without something to secure it, but for a model?????Interesting that the eyebolt and ring bolt go all the way through the bulwark; something I’ve always tried to avoid doing on my models.
I just looked at photos of a dozen contemporary models at Preble Hall in Annapolis and not one shows the bolts coming out the outer planking so we are not alone in not having them come through the hull of our models. In full size construction, it makes sense to have more than just an eyebolt without something to secure it, but for a model?????
Allan
If you use copper instead of brass, a touch of diluted liver of sulfur with a small brush or finger tip will blacken it and not stain the wood. One of the reasons I switched to copper in place of brass where possible.I’ll try nipping the brass shank off with flush cutters and applying a blob of thick paint to represent the (square?) nut.