Very impressive, cutting out those bulkheads with a jeweler’s saw! Interesting ship. I’ll enjoy following this build.
HMS Ontario 1780 scale 1:32 POB full version
- Thread starter zoly99sask
- Start date
- Watchers 80
-
- Tags
- ontario sloop-brig
Thanks Dave for stopping by and for the kind words,I am getting faster with each bulkhead,hopefully by this weekend all of them and the keel will be ready and I can build a jog for the keel.
Zoltan
Hello everyone, I was busy today cutting out more bulkheads, probably tomorrow I will finish all of them and can start on the false keel.
Hello all, I have cut out more bulkheads and transferred the false keel patterns, the false keel made out of two pieces of plywoods.
Hello everyone, all the bulkheads have been cut out, now I need to sand the rough edges.
An important step is done....it is looking realy good
Thanks for stopping by,not really yet as for now is getting complicated,above the lower deck will sort of POF .
Zoltan
Hello Uwe ,thanks for stopping by,lots of work needs to be done before the hull is finished,many modifications coming up ,sort of plan bashed construction.
Zoltan
Good morning everyone, I have finished cutting out the keel, made out of two parts and the rest of the bulkheads,
also did a rough dry fit.
also did a rough dry fit.
I forgot to show how the two pieces of the false keel joining together, and now I am off to build a holding jig for the keel to keep it straight and true.
Good evening everyone, I managed to finish today the building board keel holder for the Ontario, it was a challenge to keep everything straight and square.
G'day Zoly
I don't like to mention this, but I think your stern post is incorrect.
The transom vertical beams has to go on each side of the rudder. As you have it now the rudder can not go up.
I might be wrong, but I think you should check it.
The only reason I noticed it straight away is I've been working on my transom on the RC all day.
Havagooday
Greg
I don't like to mention this, but I think your stern post is incorrect.
The transom vertical beams has to go on each side of the rudder. As you have it now the rudder can not go up.
I might be wrong, but I think you should check it.
The only reason I noticed it straight away is I've been working on my transom on the RC all day.
Havagooday
Greg
Hello Greg,I was thinking about that too,the stern and stern gallery also the upper deck will be redesigned to sort of POF design,thanks for your input.
Thank you Mike!!
G'day Zoly
No problems. When I start to show you all my RC, I would also like input from other siblings.
Havagooday
Greg
No problems. When I start to show you all my RC, I would also like input from other siblings.
Havagooday
Greg
Good morning, I have started to align the bulkheads.
This is absolutely amazing Zoltan. Lovely workmanship and more so the way you brought all this together to build the frame.
Not to get off track, but how did you bend the mahogany for your cap rail on the Mayflower?