-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
HMS Vanguard - Amati - scale 1:72 - Foto
There are, in English, these are pages from Longridge's book "The Anatomy of Nelson's Ships"
please read
INFO - To all members, please read!
Being an international forum we have members from many Countries in the World. We do understand that posting and replying to posts using your language is much easier. However, it is difficult for others who don't understand your language and it takes extra time to translate or puts a burden on...
shipsofscale.com
Yes, it's a nice little motor, useful, even though it looks like a child's toy. I bought micro drills with a thickened shank for it on Avito, made in the USSR, 20 rubles each, they're good, they drill brass without problems. If you're interested, here's the link-https://www.avito.ru/moskva/remont_i_stroitelstvo/sverla_po_metallu_ot_0.12_do_3_mm_sssr_4152862560?utm_campaign=native&utm_medium=item_page_android&utm_source=soc_sharing
began to put shrouds on the mainmast.
making thimbles
making thimbles
finished tying the mainmast shrouds.
Oh wow- this is brilliant
rope lashing
You made a beautiful homemade tools. You should post IT on Thingiverse, or 3DCults and even charge a small fee.
I am slowly doing the rigging.
Excellent build generally. Only two comments: 1: the landyard is
running Riggend and as such should use the white or yellow rigging thread. The second -but as the ship is not completed, this will or can be taken care of. Your setup of the shroud are completely correct. You have, as not many, the correct diameter between the shroud and footstep (weblings) Well done Mate.
Assome of you may know, my wige and selves has been the siskbay, so many commnt comes to late, but may be a help to newcommers.
I have in fact for some time ago -inanother side -made the compleate standing Riggen ot the lover mast and bowsprit. I can dee in your Riggen Many semilarity
el Cape
This is just brilliant.
Изготовление мусинга грот лось штага.
Штаг- 1,8 мм.
Бусина- 4,4 мм, диаметр отверстия 2,4 мм, бук.
Канат для оплетки бусины- 0,3 мм ( Gutterman e121, 3 пряди, 2 каболки)
Making a musing grotto moose stay.Stay - 1.8 mm.Bead - 4.4 mm, hole diameter 2.4 mm, beech.Rope for braiding the bead - 0.3 mm (Gutterman e121, 3 strands, 2 cables)
Штаг- 1,8 мм.
Бусина- 4,4 мм, диаметр отверстия 2,4 мм, бук.
Канат для оплетки бусины- 0,3 мм ( Gutterman e121, 3 пряди, 2 каболки)
Making a musing grotto moose stay.Stay - 1.8 mm.Bead - 4.4 mm, hole diameter 2.4 mm, beech.Rope for braiding the bead - 0.3 mm (Gutterman e121, 3 strands, 2 cables)
installed the mainmast stays.
- Joined
- Jun 17, 2021
- Messages
- 3,029
- Points
- 588
Brilliant! 
