-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
- Joined
- Mar 1, 2022
- Messages
- 638
- Points
- 308
Such an admirable neat job! Just two question: what is the "sandwich" bulwark inner layer made of and why was that needed?
I hope I understood your question correctly. The inner layer of the partition is made of silica sand, which is commonly used in construction industry. The sand simulates a non-combustible mixture that was used as a "fireproof" material because there was a gunpowder store behind the partition.
- Joined
- Mar 1, 2022
- Messages
- 638
- Points
- 308
Perfect answer, thank you. Didn't know that at all.
Very nice and detailed work, just wonderful
Excellent, clean work! Will the model be coated with anything? I see everything inside is sealed, which makes access difficult when applying oil, for example.
Thank you guys 
.
kuba91nt - Most of the parts (except the planks) are "cut" using a CNC milling machine, which guarantees maximum precision of the cut parts.
serikoff - The decks were not glued up to this point. I glued them in the next stage (see further in this post), of course I painted the entire underdeck with wax before that.
Below deck completed, all lower decks are glued in place.
.kuba91nt - Most of the parts (except the planks) are "cut" using a CNC milling machine, which guarantees maximum precision of the cut parts.
serikoff - The decks were not glued up to this point. I glued them in the next stage (see further in this post), of course I painted the entire underdeck with wax before that.
Below deck completed, all lower decks are glued in place.