Nikitin San Bartolome 1584 A.D. (Kit #35)

Good morning Jan. Stunning. The last time I’m saying it…I love the look and feel effect you are getting on your San Bartolome. The deck, outer and curved bulkhead are magic. Cheers Grant
Hi Grant,
The Galleon is slowly taking shape. Pavel’s engineering talent has made for an exceptional kit. For a novice builder like me (translated as all thumbs, etc.) this is a unique experience, a new skill learning curve and a barrel of fun.

Jan
 
Good progress Jan. The time it takes is immaterial, the results are what matter.
Hi Heinrich,
Indeed time is immaterial, I was just musing a bit. The combination of kit plans and the vast number of vidoes provide a lot of build information. The actual hands on of cleaning, fitting, fling, sanding, painting and gluing of bits and pieces as the build progresses is a different story. I don’t know if I would have tackled this as a first time build kit.
 
The Aftercastle Deck Build.

Okie-Dokie, Jan’s version of planking that deck is complete. A couple of minor errors starting out but overall it looks like it should.

646ECEEB-932A-450F-B1FC-D05270B8F0CA.jpeg

I will stain the deck in morning. I think I will have plenty of time to get that done. A genuine NorthEaster is forecast to start later tonight and end mid afternoon on Wednesday. The weather Gurus are estimating 12-14 inches of snow with winds gusting over 50mph for our area.

Coffee-Cupin the morning and Beerin the afternoon while working in the shipyard and not worrying about the snow storm.


Jan
 
The Aftercastle Deck Build.

Okie-Dokie, Jan’s version of planking that deck is complete. A couple of minor errors starting out but overall it looks like it should.

View attachment 362760

I will stain the deck in morning. I think I will have plenty of time to get that done. A genuine NorthEaster is forecast to start later tonight and end mid afternoon on Wednesday. The weather Gurus are estimating 12-14 inches of snow with winds gusting over 50mph for our area.

Coffee-Cupin the morning and Beerin the afternoon while working in the shipyard and not worrying about the snow storm.


Jan
Good morning Jan. Best way to weather the storm;). They call Cape Town “the cape of storms” but compared to what you get it’s pretty moderate. Cheers Grant
 
Good morning Jan. Best way to weather the storm;). They call Cape Town “the cape of storms” but compared to what you get it’s pretty moderate. Cheers Grant
Hi Grant.

These storms are very unpredictable, depending on how they settle into the Gulf of Maine, the amount of weather (snow, rain, sleet, drizzle and high winds) will vary wildly along the coast or inland. We have had cases where our area snow accumulation was three to four inches while a couple of mile further inland the accumulation was more than a foot.

So it’s hunker down and enjoy the morning Coffee and look forward toBeerO’clock this afternoon.

Jan
 
A DIY tool.

Not a kit part to be included in the Galleon build, but a handy little gadget.

This little gadget shows up in Pavel’s Aftercastle Deck video #27.

Made from bits and pieces.

6CC3EC20-1117-44CC-BCA1-81C472EE9732.jpeg

Used to slightly bevel the sides of the deck plank bottom edges. Pavel’s version shows how it’s used about halfway through video #27.

Jan
 
Interesting Jan.
I've attached a fixture I made to also bevel the edges of planks.
Mine is twelve inches long and you just slide the plank into the slot then I have a 2" wide aluminum "T" sanding bar which I run along the plank to obtain the bevel. (I know, too much time on my hands)
Different width planks require the slots to be different depths.

.
Plank.jpg
 
Interesting Jan.
I've attached a fixture I made to also bevel the edges of planks.
Mine is twelve inches long and you just slide the plank into the slot then I have a 2" wide aluminum "T" sanding bar which I run along the plank to obtain the bevel. (I know, too much time on my hands)
Different width planks require the slots to be different depths.

.View attachment 362861

That is great DIY result.
 
A question for the experts.

Is there a remarkable difference between English and Spanish Galleons. I‘ve been reading different articles on the internet and what information I can find doesn’t answer my question. The Golden Hind is shown to be a “small” galleon, the Spanish treasure ships are listed as large galleons, etc. Was there a basic design that these galleons “ small to large” were build too, or did the various countries capture, copy and reverse engineer them.
 
Last edited:
Interesting Jan.
I've attached a fixture I made to also bevel the edges of planks.
Mine is twelve inches long and you just slide the plank into the slot then I have a 2" wide aluminum "T" sanding bar which I run along the plank to obtain the bevel. (I know, too much time on my hands)
Different width planks require the slots to be different depths.

.View attachment 362861
Good morning Ron. I like this a whole lot. Cheers Grant
 
Hello Jan. The overall effect from the top looks very cohesive and uniform. For someone with no airbrushing experience, you were a fast learner - well done, my friend, she looks lovely!
 
Hello Jan. The overall effect from the top looks very cohesive and uniform. For someone with no airbrushing experience, you were a fast learner - well done, my friend, she looks lovely!
Hello Heinrich. Learning to use that little gadget was fun. I spent a some time trying to get the double action trigger technique right. I now have a two foot by two foot poster board that would make Picasso proud.
 
Back
Top