Lovely work, Tobi!
-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering. -
PRE-ORDER SHIPS IN SCALE TODAY!
The beloved Ships in Scale Magazine is back and charting a new course for 2026!
Discover new skills, new techniques, and new inspirations in every issue.
NOTE THAT OUR FIRST ISSUE WILL BE JAN/FEB 2026
POF La Palme (L'Amarante) Corvette 1744 1:36 (Ancre Monograph) by Tobias
Great looking work Tobias.
- Joined
- Apr 20, 2020
- Messages
- 6,204
- Points
- 738
Precise, accurate, simply good looking. Sauber, sauber Tobias.
Fabulous work Tobias, now the monotony is over you can enjoy putting it all together
Kind Regards
Nigel
Kind Regards
Nigel
Hallo Tobias,
sehr schöne Arbeit.
Karl
sehr schöne Arbeit.
Karl
You can fully relax
It is looking very good
Well prepared and shaped - you are coming close to a complete "ships-hull" -> BRAVO
It is looking very good
Well prepared and shaped - you are coming close to a complete "ships-hull" -> BRAVO
Thank you all for the encouragement, that helps immensely and encourages me in my work.
I wish everyone a nice good evening.
Slowly but surely I am approaching the stern.
Slowly but surely I am approaching the stern.
- Joined
- Apr 20, 2020
- Messages
- 6,204
- Points
- 738
Hallo Tobias, absolutely nice and accurate work. I like it very much. Weiter so.
Hello and a nice evening together. Another 17 frames have found their place. Now I have 6 to the rear and 9 to the front.
I like it very much - Bravo my friend
I guess the keelson visible in the lowest photo is not fixed, or? Otherwise it will hinder you during the final sanding......
Looking really very good
clean and accurate in all aspects
I guess the keelson visible in the lowest photo is not fixed, or? Otherwise it will hinder you during the final sanding......
Looking really very good
clean and accurate in all aspects
Absolutely good work, Tobias. Looks fine and accurate.
Hello Uwe,I like it very much - Bravo my friend
I guess the keelson visible in the lowest photo is not fixed, or? Otherwise it will hinder you during the final sanding......
Looking really very good
you see that correctly, the Kilson is not attached. The reason the kilson is in the picture is this: every frame has to be set up and every key between the keel and the kilson has to be adjusted, i.e. with every frame I add I take out the kilson and adjust everything. Very tedious but necessary to achieve a reasonably good result.
- Joined
- Oct 23, 2018
- Messages
- 874
- Points
- 403
Wonderful progress, Tobias
Your work is looking great. Making great progress.
Bill
Bill
Beautiful work Tobias, watching your build come together is a feast for the eyes.
Hi Tobias. I had to read a lot to get to your of yesterday. Those frames are looking very very nice and tight. So beautiful!
Regards, Peter