• Win a Free Custom Engraved Brass Coin!!!
    As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.

the Colonial Schooner Hannah in 1/48 [COMPLETED BUILD]

Great going Shota!

As for your toothpick question. I am not a fan of trunnels. If I do them i usually fake it. But from through the years most modelers prefer bamboo because of it strength. They use a draw plate to get to the diameter they want. Others will use brass wire which is kinda of popular. Your planking and tree nailing looks great Sir. Your deck beams came out great too my friend.

Have Fun

Mario
 
teleman said:
Great going Shota!

As for your toothpick question. I am not a fan of trunnels. If I do them i usually fake it. But from through the years most modelers prefer bamboo because of it strength. They use a draw plate to get to the diameter they want. Others will use brass wire which is kinda of popular. Your planking and tree nailing looks great Sir. Your deck beams came out great too my friend.

Have Fun

Mario
Click to expand...
thank you very much my dear friend :)
 
good evening dear friends
Tonight I created a convex sanding block, to sand the bottom / inside of the Deck Beams with sandpaper According to the inner contour, and that's after I'm done producing all them .
The goal of the proven work was to produce uniformity in the configuration of all the Deck Beams and that the surface would be smooth and uniform.
20210217_200930.jpg20210217_210749.jpg20210217_222013.jpg20210217_222119.jpg20210217_222358.jpg
 
Good evening friends
Tonight the magic started, I started building the The infrastructure of the ship's lower deck and bow using the parts I made last week and, With an emphasis on the Deck Beams. I will let the pictures speak for themselves
20210220_182302.jpg20210220_192710.jpg20210220_194720.jpg20210220_210312.jpg20210220_210418.jpg
 
Last edited:
good evening my dear friend's
In the last few days another significant progress has been made I have finished preparing and assembling the the Deck Beams for the lower deck
Who like you knows that behind this intermediate result are hours of planning, sawing, design and construction. I am satisfied and also enjoy the process
20210302_183615.jpg20210302_183555.jpg20210302_183530.jpg
 
good evening dear friends
This past week I continued working on Framing The Poop Deck, with the Deck Clamps And Beams. I almost completed 90% of the creation of this stage. Attaches you photos 20210313_143545.jpg20210313_143607.jpg20210313_213842.jpg20210313_214004.jpg20210313_214032.jpg20210313_214139.jpg20210313_214153.jpg20210313_214158.jpg
and best wishes for a pleasant week ahead
 
You must log in or register to reply here.
Back
Top