• Beginning at 5:00AM PST (13:00 UTC) on Friday February 14th, all services in the Los Angeles, California, USA Data Center will be offline to perform a Data Center Migration. Due to the nature of this migration, we anticipate up to 24 hours of downtime to safely complete this work. Please be patient during this time and thank you for being a valuable member of our community.

VOC ship The Prins Willem (scale 1:75) Year 1651

This is an excellent discussion on carthapins and thank you @Steef66 for posting the detail of how you have rigged them.

A question, and please do not think me critical, I am merely asking - I noticed from one of your earlier posts, that the four forward, starboard shrouds have used Z laid line while the aft and port main shrouds appear to be S laid. Is that intentional? I zoomed into the photo on your post (as below), which shows this.

A04FF9E8-FF92-451C-8B1F-2BC492C56624.png

It can also be shown on the catharpins photo below:

416523BF-CE6D-419D-9AB7-2B8A9175F08B.jpeg

Regards,

PeterG
 
PeterG said:
A question, and please do not think me critical, I am merely asking - I noticed from one of your earlier posts, that the four forward, starboard shrouds have used Z laid line while the aft and port main shrouds appear to be S laid
Click to expand...
No problem. I started the rigging. And I didn"t think about Z or S laid. I hardly study how, why or what. Now I know it must be Z laid after a lot of study. That one side have 2 different laids is because I did the ratlines again and these 4 ropes I had to replace. Yes I make only Z-laid rope now.
Almost perfect:) almost.....
 
Steef66 said:
No problem. I started the rigging. And I didn"t think about Z or S laid. I hardly study how, why or what. Now I know it must be Z laid after a lot of study. That one side have 2 different laids is because I did the ratlines again and these 4 ropes I had to replace. Yes I make only Z-laid rope now.
Almost perfect:) almost.....
Click to expand...
But eventually: your ratlines are now very nisz, Stephan.
 
Buon pomeriggio, questa è la refe che uso , cotone da ciabattino
 

Attachments

  • 20220117_131021.jpg
    20220117_131021.jpg
    207.4 KB · Views: 17
  • 20220117_131005.jpg
    20220117_131005.jpg
    203.4 KB · Views: 17
  • 20220117_131009.jpg
    20220117_131009.jpg
    221.1 KB · Views: 17
This is phenomenal work Stephan and your serving machine obviously works very well. You are setting an extremely high bar with regards to your rigging! .
 
Your serving machine paid you dividends, I like it very much! But... I love your mouse made using your machine!
 
Steef66 said:
@tutti grazie per i Mi piace ei commenti

Oggi ho finito le ratline sulle sartie anteriori e ho iniziato a realizzare il mouse e l'occhio sullo strallo. E servito il soggiorno per tutta la durata.
Le immagini dicono di più:

[ALLEGARE=completo]286007[/ALLEGARE]

[ALLEGARE=completo]286008[/ALLEGARE]

[ALLEGARE=completo]286009[/ALLEGARE]

[ALLEGARE=completo]286010[/ALLEGARE]

[ALLEGARE=completo]286011[/ALLEGARE]

[ALLEGARE=completo]286012[/ALLEGARE]

[ALLEGARE=completo]286013[/ALLEGARE]

[ALLEGARE=completo]286014[/ALLEGARE]

[ALLEGARE=completo]286015[/ALLEGARE]
Click to expand...
Buon pomeriggio Steef66, un bel lavoro , ti consiglierei questo libro per la qualità in più il tuo modello
 
Last edited:
You must log in or register to reply here.
Back
Top