Yes, you are right, but if you calculate everything correctly, then the anatomical version is not so difficult. I will try and will definitely show the result.
-
LUCZORAMA SHIPWRECK SCAVENGER HUNT GIVEAWAY. 4 Weeks of Fun • 1 Legendary Prize ((OcCre’s Fram Ship)) • Global Crew Welcome!
**VIEW THREAD HERE**
HMS Alert [1777] 1:48 POF by serikoff. (Two hulls: skeleton and fully rigged)
Keel for the second hull, version No. 2.
All mistakes were taken into account and their own advice was applied... and here is the result, or rather the build process of the second version.
At first, everything is practically as in the first versions, but we cut it off only from a small part.
Then, in the same detail, I cut off the excess and scribbled a contour on the second detail with a finished profile...
Well, then cut out everything superfluous from this detail. Here the principle is simple, we prepare one part, we make a second one according to it, and the only visual connection will be the contour that we scribbled, so I made sampling (4) in excess, without bothering, because all the voids will be occupied by glue.
The main thing is to set everything straight. And do not cut everything along the contour until all the details are adjusted.
And here is the result after drilling holes from both sides! To perfectly achieve the correct arrangement of holes on both sides (if there is no vertical drilling device). That is, I drilled holes in a pattern on each side and inserted wire there on each side and glued CA gel over it. (shown above). And after grinding, I really liked the result.
I also liked the right lock. And as I expected, it was not difficult to manufacture.
I get straight high from this lock.
Well, this is a sample of the top of the keel (stem). I wanted to design it in the color scheme of the entire case. And I also really liked the result and I will do the same to the original.
(the sample was hastily made and covered with tung oil to see mostly the color and arrangement of the lines.)
I think one more day and I will finish the final version of the keel (second), which looks much better than the first (and the option from the set too!).
P.S. I really like the color scheme (yellow, blue)... just like the colors of my country's flag.
All mistakes were taken into account and their own advice was applied... and here is the result, or rather the build process of the second version.
At first, everything is practically as in the first versions, but we cut it off only from a small part.
Then, in the same detail, I cut off the excess and scribbled a contour on the second detail with a finished profile...
Well, then cut out everything superfluous from this detail. Here the principle is simple, we prepare one part, we make a second one according to it, and the only visual connection will be the contour that we scribbled, so I made sampling (4) in excess, without bothering, because all the voids will be occupied by glue.
The main thing is to set everything straight. And do not cut everything along the contour until all the details are adjusted.
And here is the result after drilling holes from both sides! To perfectly achieve the correct arrangement of holes on both sides (if there is no vertical drilling device). That is, I drilled holes in a pattern on each side and inserted wire there on each side and glued CA gel over it. (shown above). And after grinding, I really liked the result.
I also liked the right lock. And as I expected, it was not difficult to manufacture.
I get straight high from this lock.
Well, this is a sample of the top of the keel (stem). I wanted to design it in the color scheme of the entire case. And I also really liked the result and I will do the same to the original.
(the sample was hastily made and covered with tung oil to see mostly the color and arrangement of the lines.)
I think one more day and I will finish the final version of the keel (second), which looks much better than the first (and the option from the set too!).
P.S. I really like the color scheme (yellow, blue)... just like the colors of my country's flag.
- Joined
- Jul 27, 2021
- Messages
- 376
- Points
- 323
Slava Ukraini
Thank you, Günther, very nice. By the way, if you accidentally missed it, then I share photos from the museum in Greenwich at this link to GoogleDrive, There are 470 photos of models, which I liked the most. And also, in these branches I posted photos from the championships, which were held in Kyiv.Hey Sergey,
As always, incredibly impressive. I'm always impressed by your work. Many thanks for showing the beautiful model ships. Really great.
Best regards
Günther
IV Open Cup of Kyiv 2013
This was a long time ago... Even before the war. When the strongest gathered in Kyiv and competed shoulder to shoulder... But such photos should not just be stored on my disk and on my website. So, I decided to share them with the SoS community. I took all the photos myself. There are 13...
shipsofscale.com
V Open Cup of Kyiv 2014
This championship was more modest than in 2013, but there were reasons for that. However, this does not diminish the beauty of the models that were presented there; there were simply significantly fewer of them. 1/9 I'll start with the legend, Evgeny Epur. He was both a participant and a judge...
shipsofscale.com
Have fun.