Na dann viel Spass beim fräsen diese komplexen Teils
I wish you a lot of fun with milling this complex element
I wish you a lot of fun with milling this complex element
-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
Le Redoutable 1/48
- Thread starter Olivers Historic Shipyard
- Start date
- Watchers 49
-
- Tags
- le redoutable
Its easy 
.
Adjust the parts with the curves and the perpendicular flanges are the thrill. For Oliver.....
.Adjust the parts with the curves and the perpendicular flanges are the thrill. For Oliver.....
After a long research arrived finally a new tool for the Redoutable. Unboxing will coming soon. At the moment its difficult to get high quality tools. A lot of dealers has a waiting period on them until 4 month.
I think I know what's in the package
Nicht sehr inkognito, das Paket.
Nicht sehr inkognito, das Paket.
That's right where you say it, but you recently told me about it because the von Scheppach is reaching its limits.
With function or without, he is defintive a usefull stand for the frames !
A quick review about the Scheppach and the Jet Spindlesander (in German)
a good decision
JET JBOS-5 Oscillating Spindle Sander - my new toy
Some days ago I received my new "tool-toy". It is the Jet JBOS-5 Spindle sander. In the following I want to show you this interesting tool, today the important figures and the delivered content and in the following some experience using this tool during my built of the La Salamandre It is a...
shipsofscale.com
A short update for the spindelsander. The Ikea-rack costs 25 Euros, the Original Jet 250 € 
. Is there a woman included ? Nope, then the Ikea Kallax has won.
. Is there a woman included ? Nope, then the Ikea Kallax has won.
Hi Oliver!
I see two birdhouses. Through the children and woman there are other things than shipbuilding! Have fun with the grinder.
I first had my countertops attached to the wall with angles. The hum of the machines went through the whole house! Only complaints. Since the plates are mounted on tables, everyone likes me!
Best regards
Thomas
I see two birdhouses. Through the children and woman there are other things than shipbuilding!
Have fun with the grinder.I first had my countertops attached to the wall with angles. The hum of the machines went through the whole house! Only complaints. Since the plates are mounted on tables, everyone likes me!
Best regards
Thomas
To paint the birdhouses was the project from the shipyardqueen. But my workshop is to small for two shipbuilders, cow, birdhouses ect....
Yey, i know. To check all this details bevor its done is difficult. My Kressmotor sounds in a frequency that you can hear him in the last corner of the house. Reduce the RPMs helps only a little bit. Its difficult to work when the employees complain too much.
Yey, i know. To check all this details bevor its done is difficult. My Kressmotor sounds in a frequency that you can hear him in the last corner of the house. Reduce the RPMs helps only a little bit. Its difficult to work when the employees complain too much.
It is nice to see, that your queen has a small area for her own - so she can stay with you there
I have also realized the tower of frames on the right side and the huge number of other frames in the box on the floor
So you still enough to do for your new Jet - happy sanding
btw: the vac has to be installed to the backside - so you have to move the Ikea stand when using...... so you will need some rolls from the Baumarkt
I have also realized the tower of frames on the right side and the huge number of other frames in the box on the floor
So you still enough to do for your new Jet - happy sanding
btw: the vac has to be installed to the backside - so you have to move the Ikea stand when using...... so you will need some rolls from the Baumarkt
Its a lot to sand, i tested one frame. There will be dust !!!
The vac is connectable. Its Arsch auf Eimer, but it fits. A problem is to work with the angle of the table. If you have to use tha backside of the table, the clearence to the wall on´t enough. Because the big frames. But its simple to move the stand 10-20 cm. A simple thing.
I bought now 60er and 80er grid to get a faster result.
The vac is connectable. Its Arsch auf Eimer, but it fits. A problem is to work with the angle of the table. If you have to use tha backside of the table, the clearence to the wall on´t enough. Because the big frames. But its simple to move the stand 10-20 cm. A simple thing.
I bought now 60er and 80er grid to get a faster result.
Be careful with the rough sanding drums - it goes sometimes very fast when you use too much pressure - upps and you have a dent (Delle) in your frame.
I know. All the curves in my La Belle i sanded with the Spindelsander. To stay safety you have to work without force. Only with an slidemovement. Its depend a little bit how much do you need to sand.
Arrived some costs extra 
. Its cheaper to use gold for the jig then to buy a multiplex in this size. Good that the projects will run 15 - 20 years.
. Its cheaper to use gold for the jig then to buy a multiplex in this size. Good that the projects will run 15 - 20 years.
I modified the sander a little bit to sand better the inside corners. It was a lot of dust inside, its good to open the sander sometimes to clean it with the vac.
Great idea Oliver, I'll remember.
