Thanks for all the 'likes' DonRobinson.
-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
SigEp Ziggy - HMS Blandford Cross Section - 1/48 Group Build
- Thread starter SigEp Ziggy
- Start date
- Watchers 8
Hey, Doc has the correct Red, White and Blue on his avatar!
Doc, does that mean you're back from your vaca?
Doc, does that mean you're back from your vaca?
We’re back, Shane! Lots to do!
Glue experiment, red and green make brown, maybe too dark, I will play with the recipe.
Glue cutoffs and will sand later after glue dries.
Glue cutoffs and will sand later after glue dries.
Good idea - and I am looking forward to see the result.
I suggest you will not use the darkened glue for the frame construction, due to the fact, that there were no caulking between the frame elements.
But maybe this way is useful for simulating the caulking between the outside hull planking and decks
Thanks Uwe, I was looking for a contrast or outline to show the pieces of the frames. So I will use the glue without coloring it.
Slowly but surely, making progress.
Good to see those frames starting to go together. That’s when you start feeling like you’re actually building a ship!
I recognize on the used plans, that you made twice the frame No.1 - or is it every time only half of it?
You have to make a double frame, so that the elements are glued together like a brickwork.
In same way like here:
You have to make a double frame, so that the elements are glued together like a brickwork.
In same way like here:
LA SALAMANDRE, bomb ketch - POF - (CAF-models, 1/48)
Due to the fact, that I am waiting for the spar jig, which will be hopefully send by Max in short time, I started with some frame work. As I mentioned before the Salamandre is the first laser cut POF model, so I have to get used to the small but important specialities of this kind of wood /...
shipsofscale.com
The drawing has the blue frame half and there are red lines for the red frame half.
The frames get easier as you gain experience with them.
Almost done with Frame 1!
Wooh Hooh! Frame 1 in the jig, only 8 more to go!?!
looking lonely...but really good!!! Keep up great work, Shane!
Looks good, Shane! You’re on your way!
I do have a question for anyone or everyone. Does the height of the jig need to be adjusted to the frames?
I had to shorten it because the frame measures 7 inches at its widest point, however, the jig measures
6 1/4 inches to the red lines.
I had to shorten it because the frame measures 7 inches at its widest point, however, the jig measures
6 1/4 inches to the red lines.
I was wanting to decide on how to represent bolts and tree nails, and when and where to use them, maybe I could get some advice here.
I did find this and thought it was worth sharing, I hope I'm not breaking any copyright laws, but check this out.
I did find this and thought it was worth sharing, I hope I'm not breaking any copyright laws, but check this out.
I use plain old birch toothpicks as treenails. I soak them in black dye to make simulated bolts.
What I do is break off the ends of toothpicks and soak them in a bath of black dye overnight and then let them dry out. Drill your appropriate sized holes. Depending on what size drill you use to drill the simulated bolts, the toothpick tips fill the holes because they are tapered. Dip the tip of the toothpick in CA glue and push it into the hole and let dry. Snip off the toothpicks and sand. If the toothpicks sit in the dye long enough, they will be black throughout, with no "white" center. Works like a charm!
What I do is break off the ends of toothpicks and soak them in a bath of black dye overnight and then let them dry out. Drill your appropriate sized holes. Depending on what size drill you use to drill the simulated bolts, the toothpick tips fill the holes because they are tapered. Dip the tip of the toothpick in CA glue and push it into the hole and let dry. Snip off the toothpicks and sand. If the toothpicks sit in the dye long enough, they will be black throughout, with no "white" center. Works like a charm!
Thanks Doc,
The instruction call for brass wire, however, I did not study them enough. When do you use a bolt and when do you use a tree nail? You used the 'hard boiled eggs' trick on your keel. Was that the only time you used brass?
The instruction call for brass wire, however, I did not study them enough. When do you use a bolt and when do you use a tree nail? You used the 'hard boiled eggs' trick on your keel. Was that the only time you used brass?