Soleil Royal- Re-engineering Artesania Latina's New Kit by NMBROOK

With respect, I think you need to distribute that additional spacing across the entire battery, otherwise that middle 9-gun section will look odd, as compared with the gun spacing fore and aft of that section.

You can, though, make your hull-length addition in the mid-ship section where the bulkhead profile remains more or less constant.
 
Ahoy!

HULL AND DECORS FOR MODEL SOLEIL ROYAL

We can design and 3D print hull for SR as per yours (WojtasS) body plan of hull. There is no problem.
Also We can design and 3D print decors as per Tanneron or other drawings also. This is your choice.

Gun barrels for Soleil Royal are ready now.

The scale of the model does not matter. All decoration we design in the scale 1:12 or 1:24. Then just reduce to another scale you need
Always under decors we design the hull. Hulls of sailing ships this are not simple (straight) surfaces as floors in buildings. Decorations must fit tight to the hull.

@DARVIS ARCHITECTVS wrote - It would take more work and expense, but the end result would be worth it…… YES WILL BE EXPENSIVE. :(

The price of the project of all decors and hull to model Soleil Royal is 2000 EURO. If there were 10 willing modelers........ the cost of the project would be 200 Euro per person.

Of course to make this we need TIME About 9-10 Months. :D

Currently we are busy at the designing decors for model Le Fleuron. Initialy we can begin work on decors to model Soleil Royal in March 2024. 3D Printout will be ready earliest in spring the year 2025 ;)

Thanks,
Kris
 
SZKUTNIK said:
Ahoy!

HULL AND DECORS FOR MODEL SOLEIL ROYAL

We can design and 3D print hull for SR as per yours (WojtasS) body plan of hull. There is no problem.
Also We can design and 3D print decors as per Tanneron or other drawings also. This is your choice.

Gun barrels for Soleil Royal are ready now.

The scale of the model does not matter. All decoration we design in the scale 1:12 or 1:24. Then just reduce to another scale you need
Always under decors we design the hull. Hulls of sailing ships this are not simple (straight) surfaces as floors in buildings. Decorations must fit tight to the hull.

@DARVIS ARCHITECTVS wrote - It would take more work and expense, but the end result would be worth it…… YES WILL BE EXPENSIVE. :(

The price of the project of all decors and hull to model Soleil Royal is 2000 EURO. If there were 10 willing modelers........ the cost of the project would be 200 Euro per person.

Of course to make this we need TIME About 9-10 Months. :D

Currently we are busy at the designing decors for model Le Fleuron. Initialy we can begin work on decors to model Soleil Royal in March 2024. 3D Printout will be ready earliest in spring the year 2025 ;)

Thanks,
Kris
Click to expand...
BUT IT WILL BE WORTH IT!
 
SZKUTNIK said:
Ahoy!

HULL AND DECORS FOR MODEL SOLEIL ROYAL

We can design and 3D print hull for SR as per yours (WojtasS) body plan of hull. There is no problem.
Also We can design and 3D print decors as per Tanneron or other drawings also. This is your choice.

Gun barrels for Soleil Royal are ready now.

The scale of the model does not matter. All decoration we design in the scale 1:12 or 1:24. Then just reduce to another scale you need
Always under decors we design the hull. Hulls of sailing ships this are not simple (straight) surfaces as floors in buildings. Decorations must fit tight to the hull.

@DARVIS ARCHITECTVS wrote - It would take more work and expense, but the end result would be worth it…… YES WILL BE EXPENSIVE. :(

The price of the project of all decors and hull to model Soleil Royal is 2000 EURO. If there were 10 willing modelers........ the cost of the project would be 200 Euro per person.

Of course to make this we need TIME About 9-10 Months. :D

Currently we are busy at the designing decors for model Le Fleuron. Initialy we can begin work on decors to model Soleil Royal in March 2024. 3D Printout will be ready earliest in spring the year 2025 ;)

Thanks,
Kris
Click to expand...
If we're talking about Tanneron's version and there will be other modelers participating in this project then yes I'm intrested
 
My personal opinion is that Tanneron's model is too much of a compromise; it is neither 1669, nor 1689, nor 1693 - with any conviction. Tanneron's model is an amalgamation of these sources. What I like about Nigel's model is that he is more firmly contextualizing his SR between the refit year of 1689, and the second SR of 1693.
 
Ahoy!

NMBROOK said:
Thanks MarcRedface

That price is good value for money Kris knowing the development work involved. The hard part is getting 10 modellers to agree on what to base the model on...

Happy New Year EveryoneBeerBeer
Click to expand...

@NMBROOK - it's mission impossible.
I don't believe I would ever design decors for a Soleil Royal or Sovereign of the Seas models. :)
But......
HAPPY NEW YEAR
 
You must log in or register to reply here.
Back
Top